this is where 4 second delay is happening.Reset sent to the GIMX adapter.
Current baudrate: 500000 bps.
Trying baudrate: 2000000 bps.
Trying baudrate: 1000000 bps.
Trying baudrate: 500000 bps.
src/windows/gserial.c:66 set_serial_params: SetCommState failed with error: Parametre hatalı.
Error: failed to open the GIMX adapter
Error: failed to send data to the GIMX adapter
Error message after v8 update
-
- Posts: 28
- Joined: Wed Mar 06, 2019 11:09 pm
- Location: Turkey
Re: Error message after v8 update
I dont know which usb to uart because I didnt build it myself
- LoneWolf81
- Posts: 235
- Joined: Sat Jun 15, 2019 11:49 am
- Location: South Africa
Re: Error message after v8 update
If you go into device manager and expand your com ports it should show you, for example a cp2102 will come up as Silicon Labs CP210X USB to UART Bridge and com number in brackets
Please Remember to Post your Log file in the support section , that way its easier and faster to start identifying the issue thus helping you to sort it out so you can enjoy GIMX .
Re: Error message after v8 update
I checked the delay, it is actually 3 seconds for each attempted baud rate, so 6 seconds in total. This happens because your adapter is built with a USB to UART adapter that does not support any of the higher baud rates GIMX is capable of using.
GIMX creator