Page 1 of 1
update
Posted: Sat May 16, 2020 10:55 pm
by Darth_Treason
i cant update my device it is the error please help
Connecting to programmer: .avrdude: butterfly_recv(): programmer is not responding
Re: update
Posted: Sun May 17, 2020 2:30 am
by kaiba_seto2004
Recheck connection between uart and AVR board.
Following this guide:
- Connect both sides of gimx adapter to PC.
- Upload new firmware.
- Unplug/replug uart side, if it does not work try again with unplug/replug AVR side.
Re: update
Posted: Sun May 17, 2020 2:50 am
by Darth_Treason
now ı have this error arrgh
Ayarli Config Degeri -c `Dualshock4.xml'
Kontroller #1: -p Baglanilan Port `COM3'
Simdi #2 Kontroller icin Bagimsiz Degiskenleri Okuyor
subpos Ayarlandi
Guncellemeleri Zorlama Ayarlandi
Otomatik Pencere Yakalama Ayarlandi
GIMX Adaptor Algilandi, Kontroller Tipi: DS4.
Firmware version: 5.8
Sifirlama Islemi GIMX Adaptore Gonderildi
Gecis Cihazı Bulundu 0x054c:0x09cc
rounding timer period 1000us to 997us
registered joystick 0 with name "PS4 Controller"
Varsayilan Yenileme Suresini Kullanma: 10.00ms
Haptic core has source haptic_source_rumble for device 054c:05c4
No haptic sink found for joystick 0 (PS4 Controller)
Rumble pass-through to joystick 0 (PS4 Controller)
Press the key/button assigned to PS.
src/windows/gprio.c:376 unsetprocessaffinities: SetProcessAffinityMask failed with error: Erişim engellendi.
src/windows/gprio.c:376 unsetprocessaffinities: SetProcessAffinityMask failed with error: Erişim engellendi.
rounding timer period 10000us to 9976us
Re: update
Posted: Sun May 17, 2020 6:49 am
by LoneWolf81
Hi
I have a few questions.
What version of windows are you running?
Are you using an USB hub ?
You mentioned that you removed and reinstalled the software, did you restart in between?
Also if you are not using the latest GIMX please uninstall the old version and USBDK then restart your computer and reinstall GIMX 8 restart again and update the adapter again.
Could you please post a complete log file on pastebin and link it here.
I know you have a post in the Turkish section although I am english speaking I will try my best to assist you here.
Last request could you post clear photos of your adapter if you sill get the access denied error and you are using GIMX 8
Re: update
Posted: Sun May 17, 2020 1:55 pm
by Matlo
Hello,
Firmware version: 5.8
Please update firmware. Current firmware version is 8.0.
Press the key/button assigned to PS.
Did you press the PS button?
src/windows/gprio.c:376 unsetprocessaffinities: SetProcessAffinityMask failed with error: Erişim engellendi.
This is not a fatal error. If it was a fatal error GIMX would just stop.
For further help, please post the log file, and clear photos of your adapter, as requested by LoneWolf81.