Teensy 2.0++ support

Need help? Ask here and someone will help
Post Reply
stich86
Posts: 2
Joined: Fri Jan 03, 2020 8:33 am

Teensy 2.0++ support

Post by stich86 »

Hi all,

i'm trying to use the EMUG29PS4 on a Teensy 2.0++ board.
I've downloaded the GIMX-Firmware repository on local and then changed the platform from atmega324u4 to at90usb1286. Hex file was builded success fully, loaded with Teensy loader ok, but when reattach the USB cable on the PC i don't see any input device.

Is supposed to see something also if i'm not on the PS4?

Thanks!
User avatar
GoDlike
Posts: 1318
Joined: Thu Apr 28, 2016 12:47 pm
Location: Poland

Re: Teensy 2.0++ support

Post by GoDlike »

It won't work. You need 32u4 chip as stated in our wiki.
My hardware: PS3 Slim CFW 4.80 | PS4 Pro 500 Million LE | PS5 | Xbox Series X
Steam: Godlike_RU | PSN: GoDlike_RU | XBL: GoDlike
Post Reply