GIMX Adapter with Fanatec wheel
Posted: Wed Dec 25, 2019 9:53 pm
Hey everyone,
after trying around for a solid 1.5 days I give up with trying to setup my GIMX adapter. Might aswell ask you guys at this point.
First of all the Setup:
- PS4 Standart Version
- Win10 PC (all updates done)
- Fanatec V2.5 Base and V3 Pedals
- GIMX adapter (ordered from the shop directly, amazing delivery time btw. big thumbs up from my side)
Now to the problems I got.
1) If i use GIMX v7.15 with USBDK on my PC i get a BSoD (removing USBDK results in an error code regarding no DS4 controller being connected)
2) If i use GIMX v6.8 (like i've found as suggestion in this forum already) the application launches but it get the following log out of it:
3) There was another posibility that i forgot about where the "header" was not found. Tried to look for a fix. Stuff mentioned didn't help me.
I have updated all drivers and USBDK is on my PC at that point (if removed, same problem as stated above with GIMX not finding the DS4 controller connected (off) to the PC.
I have my PS4 running and everything and i'm just at the end of what to do.
The config file itself is perfectly fine and made from scratch to emulate a G29 wheel with all buttons and axis defined.
Thank you very much for the help and Merry Christmas
after trying around for a solid 1.5 days I give up with trying to setup my GIMX adapter. Might aswell ask you guys at this point.
First of all the Setup:
- PS4 Standart Version
- Win10 PC (all updates done)
- Fanatec V2.5 Base and V3 Pedals
- GIMX adapter (ordered from the shop directly, amazing delivery time btw. big thumbs up from my side)
Now to the problems I got.
1) If i use GIMX v7.15 with USBDK on my PC i get a BSoD (removing USBDK results in an error code regarding no DS4 controller being connected)
2) If i use GIMX v6.8 (like i've found as suggestion in this forum already) the application launches but it get the following log out of it:
Code: Select all
global option -l with value `log.txt'
global option -c with value `Fanatec_F1_G29.xml'
controller #1: option -p with value `COM3'
now reading arguments for controller #2
status flag is set
subpos flag is set
force_updates flag is set
GIMX 6.8 x86_64
Windows 10 (or later) x64
Kernel version: 10.0 (18363)
USB adapter detected, controller type is: G29 PS4.
gusb.c:1059 gusb_open_ids: libusb_init failed with error: Entity not found
gusb.c:1059 gusb_open_ids: libusb_init failed with error: Entity not found
No controller was found on USB buses.
gimx.c:208 SDL_main: no adapter detectedI have updated all drivers and USBDK is on my PC at that point (if removed, same problem as stated above with GIMX not finding the DS4 controller connected (off) to the PC.
I have my PS4 running and everything and i'm just at the end of what to do.
The config file itself is perfectly fine and made from scratch to emulate a G29 wheel with all buttons and axis defined.
Thank you very much for the help and Merry Christmas
