Page 1 of 1

How do I configure the dial from the G29 with only buttons

Posted: Sat Aug 10, 2019 10:08 pm
by Squaky
I have a SimuCUBE powered DD wheelbase and an Ascher Racing B16M button plate (https://www.ascher-racing.com/shop/b16m-usb/) and the game in question is GT Sport. I want to use one of the rotary encoders to be able to fine tune my ABS and TCS values, but since the dial is an analog input (to my knowledge, I don't own the wheel myself) whenever I turn it in a direction it will go to the maximum or minimum value instead of cycling through as intended. So what do I need to do in the configuration software to get the results I want? This is my only issue I'm having with configuring the adapter, everything else works great and I was able to configure all of my pedals and steering axis to a point where it's nice to use.

Re: How do I configure the dial from the G29 with only buttons

Posted: Sun Aug 11, 2019 4:46 am
by kaiba_seto2004
This problem was solved in this thread, you can refer ;)

Re: How do I configure the dial from the G29 with only buttons

Posted: Sun Aug 11, 2019 3:25 pm
by Squaky
Thanks a bunch