Simucube Augury G27 to pc

Need help? Ask here and someone will help
scritchs
Posts: 15
Joined: Sun Jun 16, 2019 9:22 am

Simucube Augury G27 to pc

Post by scritchs » Sun Jun 16, 2019 9:30 am

Hello

I bought a Gimx at shop.
My config win10 a simucube augury with mige 20nm
Wheel is recognize in windows as Ardruino Micro in controller config
When i Try to play forza 7 with gimx i don't have any FFB
Here is the log of GIMX.
https://pastebin.com/6nbKNkQh


I used a clubsport v3 for pedals.
I used the emug27pc.hex firmware with g27ps3/pc type

Thanks a lot for your help

User avatar
Matlo
Posts: 5395
Joined: Wed Jul 06, 2011 7:01 am
Location: France
Contact:

Re: Simucube Augury G27 to pc

Post by Matlo » Sun Jun 16, 2019 9:34 pm

Please generate a debug log file with 'controller' and 'haptic' flags checked.
GIMX creator Donate Shop

scritchs
Posts: 15
Joined: Sun Jun 16, 2019 9:22 am

Re: Simucube Augury G27 to pc

Post by scritchs » Mon Jun 17, 2019 9:15 am

Here is the log

https://pastebin.com/KdHmfE0p

thanks for your help

User avatar
Matlo
Posts: 5395
Joined: Wed Jul 06, 2011 7:01 am
Location: France
Contact:

Re: Simucube Augury G27 to pc

Post by Matlo » Mon Jun 17, 2019 12:13 pm

I can see some FFB init sequence, but there are not FFB commands coming from the adapter after that.
Did you check in-game parameters?
GIMX creator Donate Shop

scritchs
Posts: 15
Joined: Sun Jun 16, 2019 9:22 am

Re: Simucube Augury G27 to pc

Post by scritchs » Mon Jun 17, 2019 4:33 pm

Yes all ffb is at 100%
I don't have any ffb in the wheel.
I didn't feel anything
Do i have to remap all entries in game?

User avatar
Matlo
Posts: 5395
Joined: Wed Jul 06, 2011 7:01 am
Location: France
Contact:

Re: Simucube Augury G27 to pc

Post by Matlo » Tue Jun 18, 2019 5:50 am

Did you install the Logitech Gaming Software?

https://gimx.fr/wiki/index.php?title=Gu ... _.28LGS.29
GIMX creator Donate Shop

scritchs
Posts: 15
Joined: Sun Jun 16, 2019 9:22 am

Re: Simucube Augury G27 to pc

Post by scritchs » Tue Jun 18, 2019 6:39 am

Yes i install it
I follow gimx installation.

User avatar
Matlo
Posts: 5395
Joined: Wed Jul 06, 2011 7:01 am
Location: France
Contact:

Re: Simucube Augury G27 to pc

Post by Matlo » Tue Jun 18, 2019 7:22 am

Did you check if the FFB is enabled in the LGS? Did you test the FFB from the LGS?
GIMX creator Donate Shop

scritchs
Posts: 15
Joined: Sun Jun 16, 2019 9:22 am

Re: Simucube Augury G27 to pc

Post by scritchs » Tue Jun 18, 2019 7:55 am

I can't test ffb in logitech profiler there's nothing to do that. but all settings is at 100% . And i see that wheel turn ok.

here is the message i see when i turn on gimx

https://ibb.co/b2Lh5W6

scritchs
Posts: 15
Joined: Sun Jun 16, 2019 9:22 am

Re: Simucube Augury G27 to pc

Post by scritchs » Tue Jun 18, 2019 8:06 am

Ok i have a ffb but i was very very insignifiant. When i slide a lot with a car i feel a little ffb. How could i change that ?

Post Reply