Thrustmaster TMX steering wheel on PS4
Posted: Fri May 17, 2019 9:02 pm
Devices:
Official GIMX adapter
Thrustmaster TMX
Dualshock 4
PS4
Windows 10 64-bit PC
Problem: the program doesn't detect the steering wheel.
I've read the setup guide, several forum's topics, and all. I don't know what I'm doing wrong.
I installed the program, restarted the PC, plugged the adapter, steering wheel and DS4 (turned off). Checked the connections. Open the program, select G27 to G29 config, check before launching, launch, and steering wheel is not detected. Launch:
https://i.imgur.com/OTirFzb.png
Log: https://pastebin.com/JzB0LGvF
Tried with T300 config, it seems to detect the steering wheel. Check before launch, "OK!", launch, push PS button. I start to push buttons of the steering wheel, it doesn't react.
https://i.imgur.com/HEKS2jZ.png
Log: https://pastebin.com/z2qJgJK4
I disconnect the steering wheel, check before launch (T300 config), and still says "OK!", so... it doesn't work
I read that the official adapter comes with G27 to G29 firmware installed. I tried to install another firmware, but this is what happens: https://i.imgur.com/AhqMYlE.png
If I try to create my own configuration, when I try to assing a button, and push anyone of the steering wheel''s, nothing happens.
Help is much appreciated!
Official GIMX adapter
Thrustmaster TMX
Dualshock 4
PS4
Windows 10 64-bit PC
Problem: the program doesn't detect the steering wheel.
I've read the setup guide, several forum's topics, and all. I don't know what I'm doing wrong.
I installed the program, restarted the PC, plugged the adapter, steering wheel and DS4 (turned off). Checked the connections. Open the program, select G27 to G29 config, check before launching, launch, and steering wheel is not detected. Launch:
https://i.imgur.com/OTirFzb.png
Log: https://pastebin.com/JzB0LGvF
Tried with T300 config, it seems to detect the steering wheel. Check before launch, "OK!", launch, push PS button. I start to push buttons of the steering wheel, it doesn't react.
https://i.imgur.com/HEKS2jZ.png
Log: https://pastebin.com/z2qJgJK4
I disconnect the steering wheel, check before launch (T300 config), and still says "OK!", so... it doesn't work
I read that the official adapter comes with G27 to G29 firmware installed. I tried to install another firmware, but this is what happens: https://i.imgur.com/AhqMYlE.png
If I try to create my own configuration, when I try to assing a button, and push anyone of the steering wheel''s, nothing happens.
Help is much appreciated!