failed to read packet header from the GIMX adapter

Need help? Ask here and someone will help
User avatar
GoDlike
Posts: 823
Joined: Thu Apr 28, 2016 12:47 pm
Location: Poland

Re: failed to read packet header from the GIMX adapter

Post by GoDlike » Mon Feb 04, 2019 11:34 am

Yes you have to select Pro Micro but I don't understand why you want to use Builder instead of gimx-loader. It's much easier to use.
My hardware: PS3 Slim CFW 4.80 | PS4 Pro 500 Million LE | Xbox One S
Steam: Godlike_RU | PSN: GoDlike_RU | XBL: GoDlike

Davros
Posts: 19
Joined: Sat Jan 26, 2019 11:01 am

Re: failed to read packet header from the GIMX adapter

Post by Davros » Mon Feb 04, 2019 11:43 am

there is no option for pro micro, can i use gimx-loader to write for first time?
what about red led in arduino ?
and there is no led turn on in USB to UART adapter CP2102 !

User avatar
Matlo
Posts: 5365
Joined: Wed Jul 06, 2011 7:01 am
Location: France
Contact:

Re: failed to read packet header from the GIMX adapter

Post by Matlo » Mon Feb 04, 2019 2:01 pm

Yes, gimx-loader should work.

However, any of the following issues will make it fail: incorrect wiring, faulty contact, defective hardware, defective cable, incorrect operation (like not plugging/unplugging cables when requested, or plugging it to the wrong target).
GIMX creator Donate Shop

Davros
Posts: 19
Joined: Sat Jan 26, 2019 11:01 am

Re: failed to read packet header from the GIMX adapter

Post by Davros » Mon Feb 04, 2019 3:26 pm

pls help this time i do eveyting good
Image
Image
Image
Image

User avatar
Matlo
Posts: 5365
Joined: Wed Jul 06, 2011 7:01 am
Location: France
Contact:

Re: failed to read packet header from the GIMX adapter

Post by Matlo » Mon Feb 04, 2019 4:19 pm

Wiring is incorrect. CP2102 TXD should be connected to pro micro RXI. CP2102 RXD should be connected to pro micro TXO.
GIMX creator Donate Shop

Davros
Posts: 19
Joined: Sat Jan 26, 2019 11:01 am

Re: failed to read packet header from the GIMX adapter

Post by Davros » Mon Feb 04, 2019 4:29 pm

failed to load firmware

Davros
Posts: 19
Joined: Sat Jan 26, 2019 11:01 am

Re: failed to read packet header from the GIMX adapter

Post by Davros » Mon Feb 04, 2019 4:44 pm

problem solved, i use short connect between rst and gnd

Post Reply