failed to read packet header from the GIMX adapter

Need help? Ask here and someone will help
User avatar
GoDlike
Posts: 1318
Joined: Thu Apr 28, 2016 12:47 pm
Location: Poland

Re: failed to read packet header from the GIMX adapter

Post by GoDlike »

Yes you have to select Pro Micro but I don't understand why you want to use Builder instead of gimx-loader. It's much easier to use.
My hardware: PS3 Slim CFW 4.80 | PS4 Pro 500 Million LE | PS5 | Xbox Series X
Steam: Godlike_RU | PSN: GoDlike_RU | XBL: GoDlike
Davros
Posts: 19
Joined: Sat Jan 26, 2019 11:01 am

Re: failed to read packet header from the GIMX adapter

Post by Davros »

there is no option for pro micro, can i use gimx-loader to write for first time?
what about red led in arduino ?
and there is no led turn on in USB to UART adapter CP2102 !
User avatar
Matlo
Posts: 5768
Joined: Wed Jul 06, 2011 7:01 am
Location: France
Contact:

Re: failed to read packet header from the GIMX adapter

Post by Matlo »

Yes, gimx-loader should work.

However, any of the following issues will make it fail: incorrect wiring, faulty contact, defective hardware, defective cable, incorrect operation (like not plugging/unplugging cables when requested, or plugging it to the wrong target).
GIMX creator
Davros
Posts: 19
Joined: Sat Jan 26, 2019 11:01 am

Re: failed to read packet header from the GIMX adapter

Post by Davros »

pls help this time i do eveyting good
Image
Image
Image
Image
User avatar
Matlo
Posts: 5768
Joined: Wed Jul 06, 2011 7:01 am
Location: France
Contact:

Re: failed to read packet header from the GIMX adapter

Post by Matlo »

Wiring is incorrect. CP2102 TXD should be connected to pro micro RXI. CP2102 RXD should be connected to pro micro TXO.
GIMX creator
Davros
Posts: 19
Joined: Sat Jan 26, 2019 11:01 am

Re: failed to read packet header from the GIMX adapter

Post by Davros »

failed to load firmware
Davros
Posts: 19
Joined: Sat Jan 26, 2019 11:01 am

Re: failed to read packet header from the GIMX adapter

Post by Davros »

problem solved, i use short connect between rst and gnd
Post Reply