Hello,
I have a TIAO GBoard running gimx, and I recently updated it from version 6.11 to 7.9 - It is now unresponsive when I hook it up to my PS3. The keyboard and mouse do not respond, but no errors are shown when I hit the start button on the gimx launcher. I have tried to plug in the gimx before and after starting up the PS3 with no response.
I went back to 6.11 - and the problem disappeared. I made no logs during the circumstance to report what was happening, but I will check back in on this thread and if any gimx staff are interested in troubleshooting it - I can reinstall 7.9 get a log and post the results.
Other than this update Gimx has performed exceedingly well, thank you for your continued efforts.
Updated Gimx from 6.11 to 7.9 - no longer working with PS3
-
- Posts: 6
- Joined: Wed Feb 07, 2018 8:39 pm
-
- Posts: 6
- Joined: Wed Feb 07, 2018 8:39 pm
Re: Updated Gimx from 6.11 to 7.9 - no longer working with PS3
Before upgrading I read all the notes on the releases after 6.11 and thought maybe the notes about 7.6 had some factor in this, they did - thank you for the link. The primary problem was the location of the firmware folder that the TIAO board/Atmel Flip was reading the firmware from - after double checking the file path and updating the firmware there everything is working fine at 7.9
Thank you for the prompt response and assistance
Thank you for the prompt response and assistance