Homemade adapter. I'm using a Teensy 2.0 (official) for the adapter, and an Arduino Uno as a TTY-USB (GND-Reset connected). Firmware from firmwares-5.8/EMUPS4/atmega32u4.hex . Also originally tried with firmwares-5-2.8. This is on Windows, using gimx-launcher 7.9 x86_64 .
Pastebin link to log: https://pastebin.com/xux42Q8S
It just won't recognize the PS button. I've tried 3 different PS4 controllers, a bunch of different USB micro cables for the controllers, and two USB mini B cables between the adapter and the PS4. I also uninstalled and reinstalled the USBDK drivers from the tools directory. The Arduino Uno is recognized in the device manager.
Thanks for any help you're able to provide!
Stuck at "Press the PS button to activate the controller"
Re: Stuck at "Press the PS button to activate the controller"
Did you press F3? In the config you are using this key is mapped to the PS button.
GIMX creator
Re: Stuck at "Press the PS button to activate the controller"
Well, that's embarrassing. Thanks so much for your help! That was it.