Stuck at "Press the PS button to activate the controller"

Need help? Ask here and someone will help
Post Reply
ow_fanboy
Posts: 2
Joined: Thu Sep 06, 2018 7:55 pm

Stuck at "Press the PS button to activate the controller"

Post by ow_fanboy »

Homemade adapter. I'm using a Teensy 2.0 (official) for the adapter, and an Arduino Uno as a TTY-USB (GND-Reset connected). Firmware from firmwares-5.8/EMUPS4/atmega32u4.hex . Also originally tried with firmwares-5-2.8. This is on Windows, using gimx-launcher 7.9 x86_64 .

Pastebin link to log: https://pastebin.com/xux42Q8S

It just won't recognize the PS button. I've tried 3 different PS4 controllers, a bunch of different USB micro cables for the controllers, and two USB mini B cables between the adapter and the PS4. I also uninstalled and reinstalled the USBDK drivers from the tools directory. The Arduino Uno is recognized in the device manager.

Thanks for any help you're able to provide!
User avatar
Matlo
Posts: 5768
Joined: Wed Jul 06, 2011 7:01 am
Location: France
Contact:

Re: Stuck at "Press the PS button to activate the controller"

Post by Matlo »

Did you press F3? In the config you are using this key is mapped to the PS button.
GIMX creator
ow_fanboy
Posts: 2
Joined: Thu Sep 06, 2018 7:55 pm

Re: Stuck at "Press the PS button to activate the controller"

Post by ow_fanboy »

Well, that's embarrassing. Thanks so much for your help! That was it.
Post Reply