Page 1 of 1

Question regarding detection

Posted: Mon Jul 09, 2018 2:36 pm
by titanonetwo
I've taken a look at the WIKI and the FAQ, but I couldn't be sure if GIMX will work for my use case.It's not so common, but here I go:

What I need:

For example, when I press right arrow in the keyboard (i.e. through previous mapping), it must be the same as turning right all the way.

Platform I'll be using is PC.

Is it possible?

Re: Question regarding wheel detection

Posted: Mon Jul 09, 2018 4:12 pm
by GoDlike
Hello,

Yes you can do that with G27PC firmware. It will emulate G27 wheel and you can use any other wheel or even keyboard to control it.

Regards,
Daniel

Re: Question regarding detection

Posted: Mon Jul 09, 2018 4:18 pm
by titanonetwo
Thanks for your fast reply! :)

Re: Question regarding wheel detection

Posted: Mon Jul 09, 2018 4:31 pm
by GoDlike
Nope, you just connect both adapter cables to same PC. Look at our wiki page https://gimx.fr/wiki/index.php?title=Gu ... eringWheel

Re: Question regarding detection

Posted: Mon Jul 09, 2018 4:39 pm
by titanonetwo
GoDlike wrote: Mon Jul 09, 2018 4:31 pm Nope, you just connect both adapter cables to same PC. Look at our wiki page https://gimx.fr/wiki/index.php?title=Gu ... eringWheel
I had seen that image and it shows the physical wheel conected to the computer.

Well, proceeding to order an adapter! :)

Many thanks, GoDlike! ;)

Re: Question regarding wheel detection

Posted: Mon Jul 09, 2018 4:44 pm
by GoDlike
You just need to create a configuration with Type->G27PC and bind keyboard/mouse to the wheel ;)