Hi
Is it possible to to get gimx running without any adapter?
I have only some raspberry pi’s and some arduino duo boards..
Thanks
RPi3 without any adapter
- kaiba_seto2004
- Posts: 554
- Joined: Sat Jul 15, 2017 9:15 am
Re: RPi3 without any adapter
You can use onboard UART interface, refer here on wiki:
PS4 enthusiast.
Re: RPi3 without any adapter
But you need a CP**** part?
Or can I reuse a usb cable to connect it to the pins ?
Or can I reuse a usb cable to connect it to the pins ?
- kaiba_seto2004
- Posts: 554
- Joined: Sat Jul 15, 2017 9:15 am
Re: RPi3 without any adapter
No, you don't. Just connect arduino pins (atmega32u4 chip) to GPIO pins (on Rpi), don't forget to use resistors. I see you got arduino due. I'm not sure it will work or not.
PS4 enthusiast.
Re: RPi3 without any adapter
Arduino due is an ARM chip. For the firmware to work you need atmega32u4 based chip.
My hardware: PS3 Slim CFW 4.80 | PS4 Pro 500 Million LE | PS5 | Xbox Series X
Steam: Godlike_RU | PSN: GoDlike_RU | XBL: GoDlike
Steam: Godlike_RU | PSN: GoDlike_RU | XBL: GoDlike
Re: RPi3 without any adapter
Oh no
Is there any solution to do it with an ARM Chip? any hints?
Is there any solution to do it with an ARM Chip? any hints?
Re: RPi3 without any adapter
I don't think there is. Just buy some chip on atmega32u4 or our official adapter.
My hardware: PS3 Slim CFW 4.80 | PS4 Pro 500 Million LE | PS5 | Xbox Series X
Steam: Godlike_RU | PSN: GoDlike_RU | XBL: GoDlike
Steam: Godlike_RU | PSN: GoDlike_RU | XBL: GoDlike