Page 1 of 1

Can't get it working

Posted: Wed May 09, 2018 11:03 pm
by ghepardonado
Start PS with GIMX adapter
Start launcher with config FC5
Checkwarning multiple mouse and keyboard not managed
GIMX says press PS button
Nothing happens yellow light controller
if unplug and open controller error also nothing happens
WHAT AM I DOING WRONG
I use Logitech G710+ and G700 wireless gaming mouse

Re: Can't get it working

Posted: Thu May 10, 2018 11:40 am
by GoDlike
Hello,

I moved your post from configuration section as it's not related to FC5 config.

Please push PS button or nothing will happen, in FC5 config it's Backspace.

If that does not help please attach log as stated in rules - viewtopic.php?f=5&t=691

Regards,
Daniel

Re: Can't get it working

Posted: Fri May 11, 2018 1:57 pm
by ghepardonado
The only button that works is the backspace as PS button no other movements nothing
I tried uninstalling all keyboards from device manager until it was only one, disabled Logitech gaming software change the ports still nothing.

https://pastebin.com/KHfhuqd8

I use GIMX adapter on PS4 PRO
Adapter worked perfectly on GT Sport with G27 so the adapter works I am doing something wrong

Re: Can't get it working

Posted: Fri May 11, 2018 2:52 pm
by GoDlike
You currently have EMUG29_PS4 firmware loaded and it's intended to use with steering wheel. What you need is to flash EMUPS4 firmware that allows to use keyboard and mouse. Just run gimx-loader and follow the instructions. After flashing you can play FC5 without problems ;-)

Re: Can't get it working

Posted: Fri May 11, 2018 2:53 pm
by ghepardonado
Yeah just did that I saw in the log

Re: Can't get it working

Posted: Fri May 11, 2018 2:55 pm
by ghepardonado
But the mouse barely moves. How much DPI should I use?

Re: Can't get it working

Posted: Fri May 11, 2018 4:29 pm
by GoDlike
Every config is different. I think I used 3600 for FC5. It's listed if you open config with editor like gimx-fpsconfig. If it's still too low you can always increase sensitivity.