Hi Matlo,
I purchased your GIMX Adapter and haven't had success getting proper FFB with Windows 10.
I can load the firmware and I can use my wheel to control the PS4 and drive in Gran Turismo Sport, but the wheel's FFB just feels like only the centering spring force that's working. I have unchecked combined pedal in Logitech Gaming Software.
As I had no luck with Windows, I resorted to using Raspberry Pi with automated raspbian image and it gives proper FFB so I know it's not the adapter which is at fault.
Further Info
Adapter : Original GIMX Adapter
Gaming target : PS4
Game : Gran Turismo Sport
Wheel : G27
Firmware : EmuG29PS4.hex
GIMX Launcher : 7.2 64 bit
Link to what is shown in the command prompt/ terminal when running GIMX
https://pastebin.com/6C3pLbFp
Appreciate your help on this.
FFB only centering spring
Re: FFB only centering spring
Hi,
Could you please make another log file with the haptic debug flag enabled?
Select "Messages>debug", click on Start, select "log file" and validate, check "haptic" and validate.
Play a dozen of seconds and then stop GIMX.
And please upgrade to GIMX 7.3 before generating the log.
Could you please make another log file with the haptic debug flag enabled?
Select "Messages>debug", click on Start, select "log file" and validate, check "haptic" and validate.
Play a dozen of seconds and then stop GIMX.
And please upgrade to GIMX 7.3 before generating the log.
GIMX creator
-
- Posts: 8
- Joined: Wed May 09, 2018 1:28 pm
Re: FFB only centering spring
Hi Matlo,
Thank you for the prompt response.
It shows the following message in terminal.
src/windows/gprio.c:26 gprio: failed to set priority class
I have paste the log file in link below.
https://pastebin.com/M61ShhSP
Thank you for the prompt response.
It shows the following message in terminal.
src/windows/gprio.c:26 gprio: failed to set priority class
I have paste the log file in link below.
https://pastebin.com/M61ShhSP
Re: FFB only centering spring
Please make another debug log file (select "debug" in the "Messages" drop-down menu) with "haptic" checked, and play a dozen of seconds.
GIMX creator
-
- Posts: 8
- Joined: Wed May 09, 2018 1:28 pm
Re: FFB only centering spring
Thanks.
Please try this test version: https://gimx.fr/download/0d00741f8006dd ... x86_64.exe
I made it for another user a couple of weeks ago. Sadly this user did not provide feedback.
Please try this test version: https://gimx.fr/download/0d00741f8006dd ... x86_64.exe
I made it for another user a couple of weeks ago. Sadly this user did not provide feedback.
GIMX creator
-
- Posts: 8
- Joined: Wed May 09, 2018 1:28 pm
Re: FFB only centering spring
Matlo,
I've tried it, no change on the FFB. When starting it still says as follows.
I have created debug log file with haptic checked as follows. Now when exiting GIMX (shift + esc) the program crashed.
https://pastebin.com/tPj0Zndw
I've tried it, no change on the FFB. When starting it still says as follows.
Code: Select all
src/windows/gprio.c:26 gprio: failed to set priority class
global option -c with value `LogitechG27_G29.xml'
controller #1: option -p with value `COM9'
now reading arguments for controller #2
subpos flag is set
force_updates flag is set
GIMX adapter detected, controller type is: G29 PS4.
Reset sent to the GIMX adapter.
found pass-through device 0x054c:0x09cc
Timer resolution: min=156250 max=5000 current=5013
rounding timer period to 501
registered joystick 0 with name "PS4 Controller"
using default refresh period: 5.00ms
Warning: macros are not available for: joystick PS4 Controller (0)
Haptic core has source haptic_source_lg for device 046d:c24f
Haptic core has sink haptic_sink_lg for joystick 1 (Logitech G27 Racing Wheel USB)
FFB invert: no
FFB gain: constant=100 spring=100 damper=100
Press the PS button to activate the controller.
rounding timer period to 4511
I have created debug log file with haptic checked as follows. Now when exiting GIMX (shift + esc) the program crashed.
https://pastebin.com/tPj0Zndw
Re: FFB only centering spring
Ok. Could you now try with GIMX 6.11?
https://github.com/matlo/GIMX/releases/ ... x86_64.exe
https://github.com/matlo/GIMX/releases/ ... x86_64.exe
GIMX creator
-
- Posts: 8
- Joined: Wed May 09, 2018 1:28 pm
Re: FFB only centering spring
Matlo,
It worked!!! I can feel the FFB and all it's glory now. Thank you 1000x
So you've pinpoint the culprit and there's a possibility incorporating in the next update or I should just use 6.11?
Below is the log file (without haptic checked)
https://pastebin.com/GawwwvS6
It worked!!! I can feel the FFB and all it's glory now. Thank you 1000x
So you've pinpoint the culprit and there's a possibility incorporating in the next update or I should just use 6.11?
Below is the log file (without haptic checked)
https://pastebin.com/GawwwvS6
Re: FFB only centering spring
This seems to be a bug introduced with GIMX 7.1. I'll investigate and try to fix it. I'll let you know when I have a new test version!
GIMX creator