GIMX doesn't detect adapter

Need help? Ask here and someone will help
gcardy
Posts: 17
Joined: Sun Nov 19, 2017 2:53 am
Location: NYC

Re: GIMX doesn't detect adapter

Post by gcardy » Fri Dec 01, 2017 4:34 am

I mentioned that I did check the continuity from pin to pin with a multimeter and the cables plugged in. That is what you are suggesting, right?

User avatar
Godlike
Posts: 202
Joined: Thu Apr 28, 2016 12:47 pm

Re: GIMX doesn't detect adapter

Post by Godlike » Fri Dec 01, 2017 6:18 am

I don't see any other possibility than faulty AVR Board then
My hardware: Xbox 360 S "Trinity" RGH | PS3 Slim CFW 4.80 | PS4 5.01
My Steam: http://steamcommunity.com/id/Godlike_RU/

gcardy
Posts: 17
Joined: Sun Nov 19, 2017 2:53 am
Location: NYC

Re: GIMX doesn't detect adapter

Post by gcardy » Thu Jan 11, 2018 1:33 am

I received my third UART board today after waiting the past 5 weeks for it to arrive. Same error.

Jumped on the PJRC forums to ask for tech help since you mentioned that it was a bad teensy. I found this thread:
https://forum.pjrc.com/threads/35071-Te ... light=gimx

It says that if the blinking LED example works, the board is good. Maybe this is a Windows issue, or something with my MB.

User avatar
Godlike
Posts: 202
Joined: Thu Apr 28, 2016 12:47 pm

Re: GIMX doesn't detect adapter

Post by Godlike » Thu Jan 11, 2018 10:30 am

Teensy may be a chinese clone, it does not have to be bad. If I were you would test it on another PC .

You may buy official adapter, it's tested and 100% working. If you prefer DIY then try with something generic on atmega32U4 like Leonardo clone.
My hardware: Xbox 360 S "Trinity" RGH | PS3 Slim CFW 4.80 | PS4 5.01
My Steam: http://steamcommunity.com/id/Godlike_RU/

gcardy
Posts: 17
Joined: Sun Nov 19, 2017 2:53 am
Location: NYC

Re: GIMX doesn't detect adapter

Post by gcardy » Fri Jan 12, 2018 3:03 am

I finally broke down and installed Windows 10 via bootcamp. I'm still seeing the same exact error, and the only thing not different is the teensy. I guess ill head over to the PJRC forums and see if someone can help me figure this thing out.

simonzeecksvard
Posts: 1
Joined: Wed Jan 17, 2018 6:55 am

Re: GIMX doesn't detect adapter

Post by simonzeecksvard » Wed Jan 17, 2018 6:57 am

Have you got it to work?
I just have the same problem and can not make it work.

Post Reply