Error DIY GIMX 5.8 and Linux 14.04
Posted: Fri Oct 27, 2017 11:11 pm
Hello, I have the following problem, I have a DIY GIMX adapter, to use it on my PS4 console and a Logitech DFGT steering wheel, I have tried to install on Linux Ubuntu 14.04, I have even changed the cables, I think they are damaged, but it presents the same report.
I hope you can advise me. Thank you very much.
I currently use the following components and files
- Teensy 2.0
- USB 2.0 to UART TTL 6PIN Module Serial Converter CP2102
- GIMX 5.8
- Firmware 5.8 / EMUG29PS4 / atmega32u4.hex
- Playstation 4 with update 4.74
log file version GIMX 5.80
global option -l with value `log.txt'
global option -c with value `LogitechDrivingForceGT_G29.xml'
controller #1: option -p with value `/dev/ttyUSB0'
now reading arguments for controller #2
grab flag is unset
status flag is set
subpos flag is set
force_updates flag is set
GIMX 5.8 x86_64
Ubuntu 14.04.5 LTS
Linux 4.4.0-31-generic #50~14.04.1-Ubuntu SMP Wed Jul 13 01:07:32 UTC 2016 x86_64
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 002: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP210x UART Bridge / myAVR mySmartUSB light
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 007: ID 054c:05c4 Sony Corp. DualShock 4
Bus 006 Device 004: ID 046d:c29a Logitech, Inc.
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 04f2:b059 Chicony Electronics Co., Ltd CKF7037 HP webcam
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 08ff:2810 AuthenTec, Inc. AES2810
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 03f0:171d Hewlett-Packard Bluetooth 2.0 Interface [Broadcom BCM2045]
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
/: Bus 08.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
|__ Port 2: Dev 2, If 0, Class=Vendor Specific Class, Driver=cp210x, 12M
/: Bus 07.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/: Bus 06.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
|__ Port 1: Dev 4, If 0, Class=Human Interface Device, Driver=usbhid, 12M
|__ Port 2: Dev 7, If 0, Class=Human Interface Device, Driver=usbhid, 12M
/: Bus 05.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
|__ Port 1: Dev 2, If 0, Class=Vendor Specific Class, Driver=, 12M
/: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
|__ Port 1: Dev 2, If 0, Class=Wireless, Driver=btusb, 12M
|__ Port 1: Dev 2, If 1, Class=Wireless, Driver=btusb, 12M
|__ Port 1: Dev 2, If 2, Class=Vendor Specific Class, Driver=, 12M
|__ Port 1: Dev 2, If 3, Class=Application Specific Interface, Driver=, 12M
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/6p, 480M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/6p, 480M
|__ Port 5: Dev 4, If 0, Class=Video, Driver=uvcvideo, 480M
|__ Port 5: Dev 4, If 1, Class=Video, Driver=uvcvideo, 480M
native mode is already enabled for HID device 06:01 (PID=c29a)
can't read packet header
No controller detected.
adapter_detect failed
I hope you can advise me. Thank you very much.
I currently use the following components and files
- Teensy 2.0
- USB 2.0 to UART TTL 6PIN Module Serial Converter CP2102
- GIMX 5.8
- Firmware 5.8 / EMUG29PS4 / atmega32u4.hex
- Playstation 4 with update 4.74
log file version GIMX 5.80
global option -l with value `log.txt'
global option -c with value `LogitechDrivingForceGT_G29.xml'
controller #1: option -p with value `/dev/ttyUSB0'
now reading arguments for controller #2
grab flag is unset
status flag is set
subpos flag is set
force_updates flag is set
GIMX 5.8 x86_64
Ubuntu 14.04.5 LTS
Linux 4.4.0-31-generic #50~14.04.1-Ubuntu SMP Wed Jul 13 01:07:32 UTC 2016 x86_64
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 002: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP210x UART Bridge / myAVR mySmartUSB light
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 007: ID 054c:05c4 Sony Corp. DualShock 4
Bus 006 Device 004: ID 046d:c29a Logitech, Inc.
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 04f2:b059 Chicony Electronics Co., Ltd CKF7037 HP webcam
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 08ff:2810 AuthenTec, Inc. AES2810
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 03f0:171d Hewlett-Packard Bluetooth 2.0 Interface [Broadcom BCM2045]
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
/: Bus 08.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
|__ Port 2: Dev 2, If 0, Class=Vendor Specific Class, Driver=cp210x, 12M
/: Bus 07.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/: Bus 06.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
|__ Port 1: Dev 4, If 0, Class=Human Interface Device, Driver=usbhid, 12M
|__ Port 2: Dev 7, If 0, Class=Human Interface Device, Driver=usbhid, 12M
/: Bus 05.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
|__ Port 1: Dev 2, If 0, Class=Vendor Specific Class, Driver=, 12M
/: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
|__ Port 1: Dev 2, If 0, Class=Wireless, Driver=btusb, 12M
|__ Port 1: Dev 2, If 1, Class=Wireless, Driver=btusb, 12M
|__ Port 1: Dev 2, If 2, Class=Vendor Specific Class, Driver=, 12M
|__ Port 1: Dev 2, If 3, Class=Application Specific Interface, Driver=, 12M
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/6p, 480M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/6p, 480M
|__ Port 5: Dev 4, If 0, Class=Video, Driver=uvcvideo, 480M
|__ Port 5: Dev 4, If 1, Class=Video, Driver=uvcvideo, 480M
native mode is already enabled for HID device 06:01 (PID=c29a)
can't read packet header
No controller detected.
adapter_detect failed