Error DIY GIMX 5.8 and Linux 14.04

Need help? Ask here and someone will help
Post Reply
15655009
Posts: 4
Joined: Fri Oct 27, 2017 4:43 pm

Error DIY GIMX 5.8 and Linux 14.04

Post by 15655009 » Fri Oct 27, 2017 11:11 pm

Hello, I have the following problem, I have a DIY GIMX adapter, to use it on my PS4 console and a Logitech DFGT steering wheel, I have tried to install on Linux Ubuntu 14.04, I have even changed the cables, I think they are damaged, but it presents the same report.

I hope you can advise me. Thank you very much.

I currently use the following components and files

- Teensy 2.0
- USB 2.0 to UART TTL 6PIN Module Serial Converter CP2102
- GIMX 5.8
- Firmware 5.8 / EMUG29PS4 / atmega32u4.hex
- Playstation 4 with update 4.74

log file version GIMX 5.80

global option -l with value `log.txt'
global option -c with value `LogitechDrivingForceGT_G29.xml'
controller #1: option -p with value `/dev/ttyUSB0'
now reading arguments for controller #2
grab flag is unset
status flag is set
subpos flag is set
force_updates flag is set
GIMX 5.8 x86_64
Ubuntu 14.04.5 LTS
Linux 4.4.0-31-generic #50~14.04.1-Ubuntu SMP Wed Jul 13 01:07:32 UTC 2016 x86_64
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 002: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP210x UART Bridge / myAVR mySmartUSB light
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 007: ID 054c:05c4 Sony Corp. DualShock 4
Bus 006 Device 004: ID 046d:c29a Logitech, Inc.
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 04f2:b059 Chicony Electronics Co., Ltd CKF7037 HP webcam
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 08ff:2810 AuthenTec, Inc. AES2810
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 03f0:171d Hewlett-Packard Bluetooth 2.0 Interface [Broadcom BCM2045]
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
/: Bus 08.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
|__ Port 2: Dev 2, If 0, Class=Vendor Specific Class, Driver=cp210x, 12M
/: Bus 07.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/: Bus 06.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
|__ Port 1: Dev 4, If 0, Class=Human Interface Device, Driver=usbhid, 12M
|__ Port 2: Dev 7, If 0, Class=Human Interface Device, Driver=usbhid, 12M
/: Bus 05.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
|__ Port 1: Dev 2, If 0, Class=Vendor Specific Class, Driver=, 12M
/: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
|__ Port 1: Dev 2, If 0, Class=Wireless, Driver=btusb, 12M
|__ Port 1: Dev 2, If 1, Class=Wireless, Driver=btusb, 12M
|__ Port 1: Dev 2, If 2, Class=Vendor Specific Class, Driver=, 12M
|__ Port 1: Dev 2, If 3, Class=Application Specific Interface, Driver=, 12M
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/6p, 480M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/6p, 480M
|__ Port 5: Dev 4, If 0, Class=Video, Driver=uvcvideo, 480M
|__ Port 5: Dev 4, If 1, Class=Video, Driver=uvcvideo, 480M
native mode is already enabled for HID device 06:01 (PID=c29a)
can't read packet header
No controller detected.
adapter_detect failed

User avatar
Godlike
Posts: 99
Joined: Thu Apr 28, 2016 12:47 pm

Re: Error DIY GIMX 5.8 and Linux 14.04

Post by Godlike » Sat Oct 28, 2017 8:29 am

Please update your software and test again. There's already GIMX 6.10 and you are using very old version.
My hardware: Xbox 360 S "Trinity" RGH | PS3 Slim CFW 4.80

15655009
Posts: 4
Joined: Fri Oct 27, 2017 4:43 pm

Re: Error DIY GIMX 5.8 and Linux 14.04

Post by 15655009 » Sat Oct 28, 2017 12:28 pm

Thank you very much for your attention, try as you say, to occupy a more recent version in the same version of linux, having problem with some dependencies, so install version 16.04 of ubuntu, but generating error.

log file

global option -l with value `log.txt'
global option -c with value `LogitechDrivingForceGT_G29.xml'
controller #1: option -p with value `/dev/ttyUSB0'
now reading arguments for controller #2
grab flag is unset
status flag is set
subpos flag is set
force_updates flag is set
GIMX 6.10 x86_64
Ubuntu 16.04.3 LTS
Linux 4.4.0-31-generic #50-Ubuntu SMP Wed Jul 13 00:07:12 UTC 2016 x86_64
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 004: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP210x UART Bridge / myAVR mySmartUSB light
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 005: ID 046d:c29a Logitech, Inc.
Bus 006 Device 006: ID 054c:05c4 Sony Corp. DualShock 4
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 04f2:b059 Chicony Electronics Co., Ltd CKF7037 HP webcam
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 08ff:2810 AuthenTec, Inc. AES2810
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 03f0:171d Hewlett-Packard Bluetooth 2.0 Interface [Broadcom BCM2045]
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
/: Bus 08.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
|__ Port 2: Dev 4, If 0, Class=Vendor Specific Class, Driver=cp210x, 12M
/: Bus 07.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/: Bus 06.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
|__ Port 1: Dev 6, If 0, Class=Human Interface Device, Driver=usbhid, 12M
|__ Port 2: Dev 5, If 0, Class=Human Interface Device, Driver=usbhid, 12M
/: Bus 05.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
|__ Port 1: Dev 2, If 0, Class=Vendor Specific Class, Driver=, 12M
/: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
|__ Port 1: Dev 2, If 0, Class=Wireless, Driver=btusb, 12M
|__ Port 1: Dev 2, If 1, Class=Wireless, Driver=btusb, 12M
|__ Port 1: Dev 2, If 2, Class=Vendor Specific Class, Driver=, 12M
|__ Port 1: Dev 2, If 3, Class=Application Specific Interface, Driver=, 12M
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/6p, 480M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/6p, 480M
|__ Port 5: Dev 4, If 0, Class=Video, Driver=uvcvideo, 480M
|__ Port 5: Dev 4, If 1, Class=Video, Driver=uvcvideo, 480M
can't read packet header
can't read packet header
can't read packet header
can't read packet header
can't read packet header
can't read packet header
can't read packet header
can't read packet header
can't read packet header
can't read packet header
gimx.c:242 main: no adapter detected

User avatar
Matlo
Posts: 4451
Joined: Wed Jul 06, 2011 7:01 am
Location: France
Contact:

Re: Error DIY GIMX 5.8 and Linux 14.04

Post by Matlo » Sun Oct 29, 2017 8:28 pm

GIMX creator Donate Shop

15655009
Posts: 4
Joined: Fri Oct 27, 2017 4:43 pm

Re: Error DIY GIMX 5.8 and Linux 14.04

Post by 15655009 » Mon Oct 30, 2017 3:14 pm

Thanks.

Post Reply