DIY Adapter - unhandled decriptor type: 0x24
Posted: Fri Aug 11, 2017 7:48 am
Hi All,
I built a DIY-USB a while ago and had it running on my xbox one.
Change to PS4 and trying to get it working on there.
Steps Taken:
Reprogrammed the Board to EMUPS4\atmega32u4.hex
Connected PS4 Controller via USB
Powered on the PS4
Opened Gimx-launcher
Selected Dualshock4.xml from config
Clicked Start
Error is:
windows/gpirio.c:23 gprio: failed to set primary class
global option -c with value 'Dualshock4.xml'
controller #1: option -p with value 'COM3'
now reading arguments for controller #2
subpos flag is set
force_updates flag is set
USB adapter detected, controller type is: DS4
unhandled decriptor type: 0x24
unhandled decriptor type: 0x24
unhandled decriptor type: 0x24
unhandled decriptor type: 0x24
unhandled decriptor type: 0x24
unhandled decriptor type: 0x24
unhandled decriptor type: 0x24
unhandled decriptor type: 0x24
unhandled decriptor type: 0x24
unhandled decriptor type: 0x24
unhandled decriptor type: 0x24
unhandled decriptor type: 0x24
unhandled decriptor type: 0x24
Timer resolution: min=156250 max=5000 current=5000
using default refresh period 10.00ms
I then get a message box with a gimx error and request to debug or close.
What I have tried:
Reinstalled Gimx along with drivers
Run as administrator
Run zadig-2.3 and changed drivers for the Wireless Controller (Interface 0) and Wireless Controller (Interface 3) but no change
Thanks in advance here Matlo, appreciate the help
I built a DIY-USB a while ago and had it running on my xbox one.
Change to PS4 and trying to get it working on there.
Steps Taken:
Reprogrammed the Board to EMUPS4\atmega32u4.hex
Connected PS4 Controller via USB
Powered on the PS4
Opened Gimx-launcher
Selected Dualshock4.xml from config
Clicked Start
Error is:
windows/gpirio.c:23 gprio: failed to set primary class
global option -c with value 'Dualshock4.xml'
controller #1: option -p with value 'COM3'
now reading arguments for controller #2
subpos flag is set
force_updates flag is set
USB adapter detected, controller type is: DS4
unhandled decriptor type: 0x24
unhandled decriptor type: 0x24
unhandled decriptor type: 0x24
unhandled decriptor type: 0x24
unhandled decriptor type: 0x24
unhandled decriptor type: 0x24
unhandled decriptor type: 0x24
unhandled decriptor type: 0x24
unhandled decriptor type: 0x24
unhandled decriptor type: 0x24
unhandled decriptor type: 0x24
unhandled decriptor type: 0x24
unhandled decriptor type: 0x24
Timer resolution: min=156250 max=5000 current=5000
using default refresh period 10.00ms
I then get a message box with a gimx error and request to debug or close.
What I have tried:
Reinstalled Gimx along with drivers
Run as administrator
Run zadig-2.3 and changed drivers for the Wireless Controller (Interface 0) and Wireless Controller (Interface 3) but no change
Thanks in advance here Matlo, appreciate the help