Game Input MultipleXer

Hi,
Been trying to get this working over the last few days. Closest i get is the prompt "press PS button"
But it doesnt respond. Ive tried on the ds4 and the wheel.
I have tried on my raspian build, dietpi and also windows.
Screenshot below


Adapter im using


Which is a minimus avr v1 and a cp2102

Please help, its driving me nuts

Hi,
Please post a log file as requested here:
viewtopic.php?f=5&t=691

Update,

I tried on 2 win7 laptops, one gets nowhere near the "press PS button" my little notebook gets to the same stage as my Pi, press PS button. I see in the logs its receiving the imput from the wheel, but my ps4 never gets them - no response.

Trying ubuntu tonight hopefully.

I see this guy had the same DIY setup as me and he never posted problems, so in theory i shouldnt be having issues
https://gimx.fr/forum/viewtopic.php?f=3 ... 3483#p3483

I will grab my log file and post tonight, at work at the moment.

This is the CP2102 i bought
http://www.ebay.co.uk/itm/152220291050? ... EBIDX%3AIT

Using Gimx 6.5
Firmware 5.8 EMUG29PS4 at90usb162.hex

flashed ok, and get the this config seems ok message when i hit check

I also downgraded the pi kernel as in the wiki, same issue

Thanks for coming back to me

here is the log file

global option -l with value `log.txt'
global option -c with value `LogitechDrivingForceGT_G29.xml'
controller #1: option -p with value `COM4'
now reading arguments for controller #2
status flag is set
subpos flag is set
force_updates flag is set
GIMX 6.5 i386
Windows 7 SP1 x86
Kernel version: 6.1 (7601)
USB adapter detected, controller type is: G29 PS4.
found pass-through device 0x054c:0x05c4
Timer resolution: min=156001 max=5000 current=5000
using default refresh period: 5.00ms
macros are not available for: joystick PS4 Controller (0)
FFB device: VID=0x046d, PID=0xc29a.
Warning: can't open macro directory C:\Users\User\AppData\Roaming//gimx//macros/
Press the PS button to activate the controller.
0 1492985650.477367, wheel (-689)
0 1492985652.715495, wheel (-689), PS (255)
0 1492985653.025512, wheel (-689)
0 1492985653.880561, wheel (-689), right (255)
0 1492985654.100574, wheel (-689)
0 1492985654.285584, wheel (-689), left (255)
0 1492985654.486596, wheel (-689)
0 1492985655.591659, wheel (-689), PS (255)
0 1492985655.626661, wheel (-653), PS (255)
0 1492985655.761669, wheel (-653)
0 1492985656.101688, wheel (-653), up (255), right (255)
0 1492985656.211695, wheel (-653), right (255)
0 1492985656.226695, wheel (-653)
0 1492985656.336702, wheel (-653), right (255)
0 1492985656.441708, wheel (-653)
0 1492985656.486710, wheel (-653), right (255)
0 1492985656.581716, wheel (-653)
0 1492985656.621718, wheel (-653), right (255)
0 1492985656.751725, wheel (-653)
Exiting

There's a known issue with at90usb162 chips: https://github.com/matlo/GIMX/issues/367

Thanks for coming back to me, the wiki diy adapter page shows the at90usb162, assume it never got taken off after finding it doesnt work. Il look for another board, il post up which i intend to buy just to make sure

Look at this on eBay http://www.ebay.co.uk/itm/142360556249

Same chip as the teensy 2.0
Is this one ok?

Yes it should work.

Shame the at90usb162 doesnt work, what is the issue with them?

https://gimx.fr/forum/viewtopic.php?t=611
Assume this guy had the u32 version as he didnt post problems