RPI-Update Fixed Issue but no more Wifi
Posted: Mon Apr 03, 2017 8:58 pm
Hi guys,
I'm still troubleshooting this issue but I fixed it with the rpi-update older command mentioned in the forum post below.
https://gimx.fr/forum/viewtopic.php?f=5&t=1612
Adapter - CP2102 USB 2.0 to UART TTl 6PIN
Bluteooth - Onboard but not used
DIY USB Adapter - Teensy 2.0
Firmware - I believe atmega32u4.hex
Console - PS4
Game - GT Sport
Controller - LogitechG27
Using Logitech27_G29.xml
Computer - Raspberry Pi Zero W
OS - Raspbian Jessie - Kernal 4.4 - Version March 2017
GIMX Software 6.5
Issue - Latest Raspbian Jessie image with rpi-update has the wifi and bluetooth working but does not work properly with GIMX. For example, it will run and work during the PS4 menu but once you start the game the wheel will spin and suddenly stop (Log shows USB disconnected) after downgrading to sudo rpi-update 771a503cfc2a1130e2df2a4ddfc45ffa0f592b3f GIMX will work properly but on Raspbian the wifi and bluetooth will no longer work, it will show as disabled and not visible on Raspbian. At first I thought this was a power issue since I'm using a micro to USB hub and the G27 is connected to that hub but after running the rpi update fix mentioned in that post it fixed the issue but still no wifi and bluetooth.
Now I'm just wondering if there's a way to run the rpi-update but editing the terminal command to update but not edit a specific kernal causing the USB issue during that game bootup process.
For example, sudo SKIP_KERNAL=1 rpi-update
But after reading through it mentions that sometimes the firmware updates depend on the kernal update.
I'll keep testing stuff out and reply back with some feedback,
Thanks Matlo for making GIMX it's really awesome what you built for us, I'll try my best to help
I'm still troubleshooting this issue but I fixed it with the rpi-update older command mentioned in the forum post below.
https://gimx.fr/forum/viewtopic.php?f=5&t=1612
Adapter - CP2102 USB 2.0 to UART TTl 6PIN
Bluteooth - Onboard but not used
DIY USB Adapter - Teensy 2.0
Firmware - I believe atmega32u4.hex
Console - PS4
Game - GT Sport
Controller - LogitechG27
Using Logitech27_G29.xml
Computer - Raspberry Pi Zero W
OS - Raspbian Jessie - Kernal 4.4 - Version March 2017
GIMX Software 6.5
Issue - Latest Raspbian Jessie image with rpi-update has the wifi and bluetooth working but does not work properly with GIMX. For example, it will run and work during the PS4 menu but once you start the game the wheel will spin and suddenly stop (Log shows USB disconnected) after downgrading to sudo rpi-update 771a503cfc2a1130e2df2a4ddfc45ffa0f592b3f GIMX will work properly but on Raspbian the wifi and bluetooth will no longer work, it will show as disabled and not visible on Raspbian. At first I thought this was a power issue since I'm using a micro to USB hub and the G27 is connected to that hub but after running the rpi update fix mentioned in that post it fixed the issue but still no wifi and bluetooth.
Now I'm just wondering if there's a way to run the rpi-update but editing the terminal command to update but not edit a specific kernal causing the USB issue during that game bootup process.
For example, sudo SKIP_KERNAL=1 rpi-update
But after reading through it mentions that sometimes the firmware updates depend on the kernal update.
I'll keep testing stuff out and reply back with some feedback,
Thanks Matlo for making GIMX it's really awesome what you built for us, I'll try my best to help