Page 1 of 2
Port not found
Posted: Sat Mar 04, 2017 3:45 pm
by Schmeicheleu
Hello,
my Adapter (bought it)
looks like working on my PC win 7 pro 64, joistick and g25 are recognised. but the launcher does not show up a port..
On my netbook win 7 32 bit starter, the port is found, devices too , but the netbook is too week to start the launcher corectly.
what is the best win version to run the launcher stabel ?
Thx for helping
Michael
Re: Port not found
Posted: Mon Mar 06, 2017 3:27 pm
by Matlo
Hi,
Where did you bought your adapter?
Re: Port not found
Posted: Mon Mar 06, 2017 5:31 pm
by Schmeicheleu
Sadly not here but at madeable.blogspot
Re: Port not found
Posted: Mon Mar 06, 2017 7:15 pm
by Matlo
Make sure to apply all Windows updates, and after that reinstall GIMX, including the USBDK and CP2102 drivers at the end of the installation.
If the adapter still does not appear in gimx-launcher, then either the adapter is probably defective.
Re: Port not found
Posted: Sat Mar 11, 2017 7:48 am
by Schmeicheleu
Hi ,I reinstallt win 7 pro 64 (all updates)and gimx . same Problem , no port found, i dont think it s the adapter, cause the port is OK on another computer.
I believe its the win version or my old computer.
Re: Port not found
Posted: Sat Mar 11, 2017 3:00 pm
by Matlo
Did you check if the COM port appears in the device manager?
https://gimx.fr/wiki/index.php?title=FA ... adapter.29
Re: Port not found
Posted: Sun Mar 12, 2017 11:53 am
by Schmeicheleu
The COM port did not appear in the manager. A friend gave me additional USB ports. Now the COM port is showing up in the manager. But now my g25 is not recognised in the launcher anymore ! It was befor ! G25 driver is installed and showing up in the manager. Thx for helping
Re: Port not found
Posted: Mon Mar 13, 2017 2:05 am
by Schmeicheleu
Sorry man , my fault , wrong config (logicool)
G25 is found now
Re: Port not found
Posted: Mon Mar 13, 2017 12:33 pm
by Schmeicheleu
it works now , thx for ur help.
I have still some error message in the CMD
windows/gprio.c:23 gprio: failed to set priority class
global option -c with value `LogitechG25_G29.xml'
controller #1: option -p with value `COM3'
now reading arguments for controller #2
subpos flag is set
force_updates flag is set
USB adapter detected, controller type is: G29 PS4.
Timer resolution: min=156250 max=5000 current=4882
rounding timer period to 976
using default refresh period: 5.00ms
windows/rawinput.c:456 init_device: GetRawInputDeviceInfo failed with error: Es
sind keine Daten mehr verfügbar.
windows/rawinput.c:456 init_device: GetRawInputDeviceInfo failed with error: Es
sind keine Daten mehr verfügbar.
rounding timer period to 4882
wheel range adjusted to 900 degrees
wheel range adjusted to 540 degrees
wheel range adjusted to 800 degrees
wheel range adjusted to 540 degrees
wheel range adjusted to 800 degrees
Re: Port not found
Posted: Mon Mar 13, 2017 12:54 pm
by Matlo
Can you list the brand + model of the connected mice and keyboards?