Hi,
I have ps4 pro+dfgt,raspberry pi 2,arduino leonardo and cp2012.
I try to install gimx on raspberry pi 2 but i have a little doubts...
How can i install on raspberry the last version 6.4?
I think first install raspbian on my raspi (Raspbian Jessie Lite) from raspberry page but i don´t know how install gimx...
I have install .hex on my arduino and connect cp 2012.
Thanks and regards
Raspberry pi2+DFGT+PS4 PRO
Re: Raspberry pi2+DFGT+PS4 PRO
Hi,
Did you read this: https://gimx.fr/wiki/index.php?title=RPi ?
Did you read this: https://gimx.fr/wiki/index.php?title=RPi ?
GIMX creator
Re: Raspberry pi2+DFGT+PS4 PRO
Hi,
I install about wiki https://gimx.fr/wiki/index.php?title=RPi and ok.
But dònt work drive wheels,the buttoms do nothing,only when RP2 on calibrate drive wheels
I have this error and ,it´s correct configuration?
I install about wiki https://gimx.fr/wiki/index.php?title=RPi and ok.
But dònt work drive wheels,the buttoms do nothing,only when RP2 on calibrate drive wheels
I have this error and ,it´s correct configuration?
Re: Raspberry pi2+DFGT+PS4 PRO
yes,all buttoms...
Re: Raspberry pi2+DFGT+PS4 PRO
- select "Messages>Log file"
- start GIMX and play
- when the problem shows up, stop GIMX
- post the log file (truncate it if it is too big)
GIMX creator
Re: Raspberry pi2+DFGT+PS4 PRO
global option -l with value `log.txt'
global option -c with value `LogitechDrivingForceGT_G29.xml'
controller #1: option -p with value `/dev/ttyUSB0'
now reading arguments for controller #2
status flag is set
subpos flag is set
force_updates flag is set
GIMX 6.4 ARMv6
Raspbian GNU/Linux 8.0 (jessie)
Linux 4.4.38-v7+ #938 SMP Thu Dec 15 15:22:21 GMT 2016 unknown
Bus 001 Device 008: ID 054c:09cc Sony Corp.
Bus 001 Device 006: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP210x UART Bridge / myAVR mySmartUSB light
Bus 001 Device 005: ID 192f:0916 Avago Technologies, Pte.
Bus 001 Device 007: ID 046d:c29a Logitech, Inc.
Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. SMSC9512/9514 Fast Ethernet Adapter
Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=dwc_otg/1p, 480M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/5p, 480M
|__ Port 1: Dev 3, If 0, Class=Vendor Specific Class, Driver=smsc95xx, 480M
|__ Port 2: Dev 7, If 0, Class=Human Interface Device, Driver=usbhid, 12M
|__ Port 3: Dev 5, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
|__ Port 4: Dev 6, If 0, Class=Vendor Specific Class, Driver=cp210x, 12M
|__ Port 5: Dev 8, If 0, Class=Audio, Driver=snd-usb-audio, 12M
|__ Port 5: Dev 8, If 1, Class=Audio, Driver=snd-usb-audio, 12M
|__ Port 5: Dev 8, If 2, Class=Audio, Driver=snd-usb-audio, 12M
|__ Port 5: Dev 8, If 3, Class=Human Interface Device, Driver=usbhid, 12M
can't read packet header
can't read packet header
can't read packet header
can't read packet header
can't read packet header
can't read packet header
can't read packet header
can't read packet header
can't read packet header
can't read packet header
gimx.c:208 main: no adapter detected
global option -c with value `LogitechDrivingForceGT_G29.xml'
controller #1: option -p with value `/dev/ttyUSB0'
now reading arguments for controller #2
status flag is set
subpos flag is set
force_updates flag is set
GIMX 6.4 ARMv6
Raspbian GNU/Linux 8.0 (jessie)
Linux 4.4.38-v7+ #938 SMP Thu Dec 15 15:22:21 GMT 2016 unknown
Bus 001 Device 008: ID 054c:09cc Sony Corp.
Bus 001 Device 006: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP210x UART Bridge / myAVR mySmartUSB light
Bus 001 Device 005: ID 192f:0916 Avago Technologies, Pte.
Bus 001 Device 007: ID 046d:c29a Logitech, Inc.
Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. SMSC9512/9514 Fast Ethernet Adapter
Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=dwc_otg/1p, 480M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/5p, 480M
|__ Port 1: Dev 3, If 0, Class=Vendor Specific Class, Driver=smsc95xx, 480M
|__ Port 2: Dev 7, If 0, Class=Human Interface Device, Driver=usbhid, 12M
|__ Port 3: Dev 5, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
|__ Port 4: Dev 6, If 0, Class=Vendor Specific Class, Driver=cp210x, 12M
|__ Port 5: Dev 8, If 0, Class=Audio, Driver=snd-usb-audio, 12M
|__ Port 5: Dev 8, If 1, Class=Audio, Driver=snd-usb-audio, 12M
|__ Port 5: Dev 8, If 2, Class=Audio, Driver=snd-usb-audio, 12M
|__ Port 5: Dev 8, If 3, Class=Human Interface Device, Driver=usbhid, 12M
can't read packet header
can't read packet header
can't read packet header
can't read packet header
can't read packet header
can't read packet header
can't read packet header
can't read packet header
can't read packet header
can't read packet header
gimx.c:208 main: no adapter detected
Re: Raspberry pi2+DFGT+PS4 PRO
The wiring between the Arduino Leonardo and the CP2102 board is probably incorrect. Double check it.
If it still does not work, post a clear picture showing the wiring.
If it still does not work, post a clear picture showing the wiring.
GIMX creator
Re: Raspberry pi2+DFGT+PS4 PRO
Yeah,it´s working
The problem is the connection between TX and Rx.
The correct in my cp2102 is TX with RX,other users connect TX whith TX
Thank you very much
The problem is the connection between TX and Rx.
The correct in my cp2102 is TX with RX,other users connect TX whith TX
Thank you very much