Xbox One

Need help? Ask here and someone will help
slopestyle1260
Posts: 6
Joined: Tue Jan 24, 2017 4:13 am

Xbox One

Post by slopestyle1260 »

I've read everything I could find to try and solve my problem, nothing seems to work.
Here's my log file.

Code: Select all

global option -l with value `log.txt'
global option -c with value `XOnePadUsbXinput.xml'
controller #1: option -p with value `COM3'
now reading arguments for controller #2
status flag is set
subpos flag is set
force_updates flag is set
GIMX 6.3 x86_64
Windows 10 (or later) x64
Kernel version: 10.0 (14393)
windows/async.c:344 async_read_timeout: ReadFile failed: timeout expired.
can't read packet header
gimx.c:208 SDL_main: no adapter detected
I'm using a CP2102, Teensy 2.0, firmware 5.8/EMUXONE/atmega32u4.hex. I know it's wired correctly I've checked 500 times, I've tested the serial adapter too.
Console is a xbox one, I have the controller without the 3.5mm jack, idk what else to do I feel like I've read everything I could find over and over nothing works.
User avatar
Matlo
Posts: 5768
Joined: Wed Jul 06, 2011 7:01 am
Location: France
Contact:

Re: Xbox One

Post by Matlo »

Please post a clear picture of you adapter showing the wiring.
Did you power up the Xbox One?
GIMX creator
slopestyle1260
Posts: 6
Joined: Tue Jan 24, 2017 4:13 am

Re: Xbox One

Post by slopestyle1260 »

Matlo wrote: Tue Jan 24, 2017 8:46 am Please post a clear picture of you adapter showing the wiring.
Did you power up the Xbox One?
Ok, here is the adapter.



And yes, the xb1 was powered on.
User avatar
Matlo
Posts: 5768
Joined: Wed Jul 06, 2011 7:01 am
Location: France
Contact:

Re: Xbox One

Post by Matlo »

Are the Teensy pins soldered?
GIMX creator
slopestyle1260
Posts: 6
Joined: Tue Jan 24, 2017 4:13 am

Re: Xbox One

Post by slopestyle1260 »

Matlo wrote: Wed Jan 25, 2017 8:47 am Are the Teensy pins soldered?
I haven't soldered anything
User avatar
Matlo
Posts: 5768
Joined: Wed Jul 06, 2011 7:01 am
Location: France
Contact:

Re: Xbox One

Post by Matlo »

The Teensy pins have to be soldered as shown below:
GIMX creator
slopestyle1260
Posts: 6
Joined: Tue Jan 24, 2017 4:13 am

Re: Xbox One

Post by slopestyle1260 »

Guess I misunderstood what you meant by that, my Teensy board looks just like that the pins are soldered to the board.
slopestyle1260
Posts: 6
Joined: Tue Jan 24, 2017 4:13 am

Re: Xbox One

Post by slopestyle1260 »

Matlo, do you think I have a bad connection at the teensy board?
User avatar
Matlo
Posts: 5768
Joined: Wed Jul 06, 2011 7:01 am
Location: France
Contact:

Re: Xbox One

Post by Matlo »

Yes, there's a bad connection between the two boards.
If you have extra jumper wires, try to change them.
GIMX creator
slopestyle1260
Posts: 6
Joined: Tue Jan 24, 2017 4:13 am

Re: Xbox One

Post by slopestyle1260 »

Tried a whole new set of cables, same problem.
Post Reply