Gimx-config detect gas & brake in the same axis

Need help? Ask here and someone will help
Post Reply
Behead
Posts: 3
Joined: Sat Jan 14, 2017 4:19 pm

Gimx-config detect gas & brake in the same axis

Post by Behead »

First of all sorry for my english. I run the gimx perfectly with the Logitech momo racing, ps4 and the project cars, using a output DIY USB, and a config i made. Today i war trying to use it with the dirt rally, all was perfect but the brake wasnt operativo, no push anyone was 50%gas, pressing gas 100%, and pressing break 0%gas, but not brakes anyform, so i have tried to configure it again and the gimx-config, in axis, detects the brake and gas with the same axis, 1, in the past, gas was 1, break 2 and the wheel 0, now, wheel 0, gas 1 and break 1. Could be a gimx problem or just my logitech is broken?..

Thanks for this software and your help!
User avatar
Matlo
Posts: 5768
Joined: Wed Jul 06, 2011 7:01 am
Location: France
Contact:

Re: Gimx-config detect gas & brake in the same axis

Post by Matlo »

Hi,
In the Logitech Gaming Software, disable combined pedals.
GIMX creator
Behead
Posts: 3
Joined: Sat Jan 14, 2017 4:19 pm

Re: Gimx-config detect gas & brake in the same axis

Post by Behead »

Thanks! Now gimx-config detects them like diferent axis, but now the problem is worst, the direccion interact in break and gas, never happened this, i dont know neither how to fix it... sorry for so much problemns, and thanks again to you

@matlo
User avatar
Matlo
Posts: 5768
Joined: Wed Jul 06, 2011 7:01 am
Location: France
Contact:

Re: Gimx-config detect gas & brake in the same axis

Post by Matlo »

Maybe you are not running the latest GIMX version? Try to upgrade and see if the problem still happens.
GIMX creator
Behead
Posts: 3
Joined: Sat Jan 14, 2017 4:19 pm

Re: Gimx-config detect gas & brake in the same axis

Post by Behead »

Thanks! Now all runs perfectly! Never grateful enough for all
Post Reply