PS4 Joystick not found(0)

Need help? Ask here and someone will help
Post Reply
chacaman
Posts: 5
Joined: Wed Dec 28, 2016 1:14 pm

PS4 Joystick not found(0)

Post by chacaman »

Hi, guys thanks for your time and Help

PC: RaspBerryPi Model 3
Wheel: Logitech G25
Console: PS4
DualShock: DS4
Error: Joystick not Found

Test1:
i test the system using last raspberry pi firmware and the same error
sudo rpi-update
sudo reboot

Test2:
i test the system using old raspberry pi firmare and the same error
sudo rpi-update 771a503cfc2a1130e2df2a4ddfc45ffa0f592b3f
sudo reboot

Note:
in the raspberry pi using lsusb i see the DS4
Bus 001 Device 010: ID 054c:09cc Sony Corp.

Next Log:

Code: Select all

global option -l with value `log.txt'
global option -c with value `LogitechG25_G29.xml'
controller #1: option -p with value `/dev/ttyUSB0'
now reading arguments for controller #2
status flag is set
subpos flag is set
force_updates flag is set
GIMX 5.8 ARMv6
Raspbian GNU/Linux 8.0 (jessie)
Linux 4.1.21-v7+ #873 SMP Mon Apr 11 18:22:10 BST 2016 unknown
Bus 001 Device 006: ID 046d:c299 Logitech, Inc. G25 Racing Wheel
[b]Bus 001 Device 010: ID 054c:09cc Sony Corp. [/b]
Bus 001 Device 004: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP210x UART Bridge / myAVR mySmartUSB light
Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. SMSC9512/9514 Fast Ethernet Adapter
Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp. 
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=dwc_otg/1p, 480M
    |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/5p, 480M
        |__ Port 1: Dev 3, If 0, Class=Vendor Specific Class, Driver=smsc95xx, 480M
        |__ Port 3: Dev 4, If 0, Class=Vendor Specific Class, Driver=cp210x, 12M
        |__ Port 4: Dev 10, If 0, Class=Audio, Driver=snd-usb-audio, 12M
        |__ Port 4: Dev 10, If 1, Class=Audio, Driver=snd-usb-audio, 12M
        |__ Port 4: Dev 10, If 2, Class=Audio, Driver=snd-usb-audio, 12M
        |__ Port 4: Dev 10, If 3, Class=Human Interface Device, Driver=usbhid, 12M
        |__ Port 5: Dev 6, If 0, Class=Human Interface Device, Driver=usbhid, 12M
native mode is already enabled for HID device 01:01:05 (PID=c299)
Detected USB adapter: G29 PS4.
No controller was found on USB buses.
adapter_detect failed
User avatar
Matlo
Posts: 5768
Joined: Wed Jul 06, 2011 7:01 am
Location: France
Contact:

Re: PS4 Joystick not found(0)

Post by Matlo »

The new Dualshock 4 controller is only supported since GIMX 6.0.
GIMX creator
chacaman
Posts: 5
Joined: Wed Dec 28, 2016 1:14 pm

Re: PS4 Joystick not found(0)

Post by chacaman »

ok, thanks for your time and help

i will performance full update of the raspberry and then update the gimx to 6.0 correct?
i can only update the software?
User avatar
Matlo
Posts: 5768
Joined: Wed Jul 06, 2011 7:01 am
Location: France
Contact:

Re: PS4 Joystick not found(0)

Post by Matlo »

Update to latest GIMX version using the instructions from https://gimx.fr/wiki/index.php?title=RP ... stallation
GIMX creator
chacaman
Posts: 5
Joined: Wed Dec 28, 2016 1:14 pm

Re: PS4 Joystick not found(0)

Post by chacaman »

System full update

Error:

Code: Select all

global option -l with value `log.txt'
global option -c with value `LogitechG25_G29.xml'
controller #1: option -p with value `/dev/ttyUSB0'
now reading arguments for controller #2
status flag is set
subpos flag is set
force_updates flag is set
GIMX 6.3 ARMv6
Raspbian GNU/Linux 8.0 (jessie)
Linux 4.4.38-v7+ #938 SMP Thu Dec 15 15:22:21 GMT 2016 unknown
Bus 001 Device 035: ID 046d:c299 Logitech, Inc. G25 Racing Wheel
Bus 001 Device 024: ID 054c:09cc Sony Corp. 
Bus 001 Device 019: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP210x UART Bridge / myAVR mySmartUSB light
Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. SMSC9512/9514 Fast Ethernet Adapter
Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp. 
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=dwc_otg/1p, 480M
    |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/5p, 480M
        |__ Port 1: Dev 3, If 0, Class=Vendor Specific Class, Driver=smsc95xx, 480M
        |__ Port 3: Dev 19, If 0, Class=Vendor Specific Class, Driver=cp210x, 12M
        |__ Port 4: Dev 24, If 0, Class=Audio, Driver=snd-usb-audio, 12M
        |__ Port 4: Dev 24, If 1, Class=Audio, Driver=snd-usb-audio, 12M
        |__ Port 4: Dev 24, If 2, Class=Audio, Driver=snd-usb-audio, 12M
        |__ Port 4: Dev 24, If 3, Class=Human Interface Device, Driver=usbhid, 12M
        |__ Port 5: Dev 35, If 0, Class=Human Interface Device, Driver=usbhid, 12M
USB adapter detected, controller type is: G29 PS4.
Reset sent to the adapter.
gusb.c:809 get_lang_id_0: libusb_control_transfer failed with error: Pipe error
gusb.c:772 get_device: libusb_control_transfer failed with error: Pipe error
No controller was found on USB buses.
gimx.c:208 main: no adapter detected


Next Error:

Code: Select all

global option -l with value `log.txt'
global option -c with value `LogitechG25_G29.xml'
controller #1: option -p with value `/dev/ttyAMA0'
now reading arguments for controller #2
status flag is set
subpos flag is set
force_updates flag is set
GIMX 6.3 ARMv6
Raspbian GNU/Linux 8.0 (jessie)
Linux 4.4.38-v7+ #938 SMP Thu Dec 15 15:22:21 GMT 2016 unknown
Bus 001 Device 007: ID 046d:c299 Logitech, Inc. G25 Racing Wheel
Bus 001 Device 005: ID 054c:05c4 Sony Corp. 
Bus 001 Device 004: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP210x UART Bridge / myAVR mySmartUSB light
Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. SMSC9512/9514 Fast Ethernet Adapter
Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp. 
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=dwc_otg/1p, 480M
    |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/5p, 480M
        |__ Port 1: Dev 3, If 0, Class=Vendor Specific Class, Driver=smsc95xx, 480M
        |__ Port 3: Dev 4, If 0, Class=Vendor Specific Class, Driver=cp210x, 12M
        |__ Port 4: Dev 5, If 0, Class=Human Interface Device, Driver=usbfs, 12M
        |__ Port 5: Dev 7, If 0, Class=Human Interface Device, Driver=usbfs, 12M
../common/posix/async.c:239 async_write_timeout: select failed with error: No such file or directory
serial_send
gimx.c:208 main: no adapter detected
chacaman
Posts: 5
Joined: Wed Dec 28, 2016 1:14 pm

Re: PS4 Joystick not found(0)

Post by chacaman »

Hi, Ok i re-install all package steby by step i don't get any error but the Wheel is not Working

Code: Select all

tail: log.txt: file truncated
sh: 1: lsb_release: not found
cannot get distribution information
Linux 4.4.34-v7+ #930 SMP Wed Nov 23 15:20:41 GMT 2016 unknown
Bus 001 Device 012: ID 046d:c299 Logitech, Inc. G25 Racing Wheel
Bus 001 Device 010: ID 054c:05c4 Sony Corp.
Bus 001 Device 004: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP210x UART Bridge / myAVR mySmartUSB light
Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. SMSC9512/9514 Fast Ethernet Adapter
Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=dwc_otg/1p, 480M
    |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/5p, 480M
        |__ Port 1: Dev 3, If 0, Class=Vendor Specific Class, Driver=smsc95xx, 480M
        |__ Port 3: Dev 4, If 0, Class=Vendor Specific Class, Driver=cp210x, 12M
        |__ Port 4: Dev 10, If 0, Class=Human Interface Device, Driver=usbhid, 12M
        |__ Port 5: Dev 12, If 0, Class=Human Interface Device, Driver=usbhid, 12M
USB adapter detected, controller type is: G29 PS4.
using default refresh period: 5.00ms
native mode is already enabled for HID device 01:01:05:00:00 (PID=c299)
User avatar
Matlo
Posts: 5768
Joined: Wed Jul 06, 2011 7:01 am
Location: France
Contact:

Re: PS4 Joystick not found(0)

Post by Matlo »

Did you press the PS button? I have to ask as it does not appear in the log.
GIMX creator
chacaman
Posts: 5
Joined: Wed Dec 28, 2016 1:14 pm

Re: PS4 Joystick not found(0)

Post by chacaman »

Yes, but the real problem is the FUC**** Chiness usb Cable sold in Amazon! i change all usb cable and now is working, note the RaspBerry Pi Need a PSU
from 5V @3AMP for Correct Function!
Post Reply