Can't connect DFGT to PS4

Need help? Ask here and someone will help
Post Reply
JHowie99
Posts: 2
Joined: Sat Dec 24, 2016 10:28 am

Can't connect DFGT to PS4

Post by JHowie99 »

Hello,

Trying to connect the Driving Force GT steering wheel to a PS4 using a TIAO adapter and a Windows 10 PC. The adapter has been flashed using DFU-programmer with firmware 5.8\EMUG29PS4\atmega32u4.hex, and connected to the PC and PS4. The steering wheel and DS4 are both also connected to the PC, with a fresh install of the Logitech profiler.
When I run GIMX using the DrivingForceGT_G29 config, I get this log file back

Code: Select all

global option -l with value `log.txt'
global option -c with value `LogitechDrivingForceGT_G29.xml'
controller #1: option -p with value `COM3'
now reading arguments for controller #2
grab flag is unset
status flag is set
subpos flag is set
force_updates flag is set
GIMX 6.3 i386
Windows 10 (or later) x86
Kernel version: 10.0 (14393)
USB adapter detected, controller type is: G29 PS4.
found pass-through device 0x054c:0x05c4
Timer resolution: min=156250 max=5000 current=5003
using default refresh period: 5.00ms
macros are not available for: joystick PS4 Controller (0)
0 1482576081.070758
0 1482576081.079264, wheel (-2269)
0 1482576081.084293, wheel (-2269), PS (255)
0 1482576081.173354, wheel (-2269)
0 1482576082.587195, wheel (-2269), PS (255)
0 1482576082.761363, wheel (-2269)
0 1482576083.464957, wheel (-2269), cross (255)
0 1482576083.573357, wheel (-2269)
0 1482576085.939044, wheel (-2269), cross (255)
0 1482576086.156747, wheel (-2269)
0 1482576088.413861, wheel (-2269), PS (255)
0 1482576088.712133, wheel (-2269)
Exiting
rounding timer period to 500
rounding timer period to 4502
If I run the DrivingForceGT_G29_W10 config, I get this log file

Code: Select all

global option -l with value `log.txt'
global option -c with value `LogitechDrivingForceGT_G29_W10.xml'
controller #1: option -p with value `COM3'
now reading arguments for controller #2
grab flag is unset
status flag is set
subpos flag is set
force_updates flag is set
GIMX 6.3 i386
Windows 10 (or later) x86
Kernel version: 10.0 (14393)
USB adapter detected, controller type is: G29 PS4.
found pass-through device 0x054c:0x05c4
Timer resolution: min=156250 max=5000 current=5003
using default refresh period: 5.00ms
joystick not found: Driving Force GT 0
0 1482576250.752977
0 1482576251.500750, PS (255)
0 1482576251.859977
0 1482576254.767355, cross (255)
0 1482576254.994053
Exiting
rounding timer period to 500
rounding timer period to 4502
Bit unsure on what they mean but it looks like one config only sees the DS4 and the other only sees the steering wheel? Would appreciate some help on where to go from here.

Thanks in advance
JHowie99
Posts: 2
Joined: Sat Dec 24, 2016 10:28 am

Re: Can't connect DFGT to PS4

Post by JHowie99 »

Never mind, got it working. Just pressing buttons in the wrong order...
Post Reply