Trying to emulate a xbox 360 pad (ive got a wired one and plugged in to the PC) i received this error
libusb_transfer failed with status LIBUSB_TRANSFER_ERROR (endpoint 0x00)
Specs : DIY usb adapter bought from steve. 6.2 version and last USBDK
When executes detect the pad ,but the button/axis doesnt work.
Thanks,regards
(XBOX 360) LIBUSB ERROR
Re: (XBOX 360) LIBUSB ERROR
Well i dont Know,cant remember, i dstroyed all the cover because it was for doing a handbrake for my wheel,Will test with an original
Re: (XBOX 360) LIBUSB ERROR
Tested today with an original pad, Im using an xbox one pad to emulate a 360 (just for test,i would love to emulate my wheel even without FFB,same issue)
My Operating system is a Windows 10 64 bits
Using last version,this issue happens with last version too. Also updated usbdk as advised in a post that ive found on google,and tried also with 1.07 version and gimx previous too.
Hope soon i can test with another OS and will give feedback.
Thanks
My Operating system is a Windows 10 64 bits
Using last version,this issue happens with last version too. Also updated usbdk as advised in a post that ive found on google,and tried also with 1.07 version and gimx previous too.
Hope soon i can test with another OS and will give feedback.
Thanks
Re: (XBOX 360) LIBUSB ERROR
For further help please provide the info requested here: viewtopic.php?f=5&t=691
A log file is the very least requirement.
A log file is the very least requirement.
GIMX creator
Error emulating XBOX 360 pad
Ive got problems trying to emulate the 360 pad
Using the steve adapter (arduino leonardo u34 board)
System : Windows 10 64 (also tested on windows 7)
Trying to emulate xbox one pad,but doesnt work with another controller
CFG : Custom with 360pad type controller enabled
Gimx version :6.3
Log file :
Using the steve adapter (arduino leonardo u34 board)
System : Windows 10 64 (also tested on windows 7)
Trying to emulate xbox one pad,but doesnt work with another controller
CFG : Custom with 360pad type controller enabled
Gimx version :6.3
Log file :
Code: Select all
global option -l with value `log.txt'
global option -c with value `as.xml'
controller #1: option -p with value `COM4'
now reading arguments for controller #2
status flag is set
subpos flag is set
force_updates flag is set
GIMX 6.3 i386
Windows 10 (or later) x64
Kernel version: 6.1 (7600)
USB adapter detected, controller type is: 360pad.
Reset sent to the adapter.
found pass-through device 0x045e:0x028e
Timer resolution: min=156250 max=5000 current=5004
using default refresh period: 8.00ms
joystick not found: XInput Controller 1
Exiting
unhandled descriptor type: 0x41
rounding timer period to 500
rounding timer period to 7506
libusb_transfer failed with status LIBUSB_TRANSFER_ERROR (endpoint=0x00)
Re: (XBOX 360) LIBUSB ERROR
Maybe this is a Windows 10 i386 issue. You're the only one I know running such system.
Try running GIMX in Linux Mint 18. This will tell if it is a hardware of a software issue.
Try running GIMX in Linux Mint 18. This will tell if it is a hardware of a software issue.
GIMX creator
Re: (XBOX 360) LIBUSB ERROR
Oh yes,its tested with the i386 version but in the x64 version tells the same thing. I dont know why tested with that version,but tried that before without sucess.
Is there any linux mint portable solution for testing only?Thanks
Is there any linux mint portable solution for testing only?Thanks