DIY Adapter not working

Need help? Ask here and someone will help
Post Reply
marcuz.kce
Posts: 1
Joined: Tue Nov 15, 2016 7:17 pm

DIY Adapter not working

Post by marcuz.kce »

HI.
not working DIY Adapter with GIMX
add log

global option -l with value `log.txt'
global option -c with value `LogitechMomoRacing_G29.xml'
controller #1: option -p with value `COM8'
now reading arguments for controller #2
status flag is set
subpos flag is set
force_updates flag is set
GIMX 6.2 x86_64
Windows 7 SP1 x64
Kernel version: 6.1 (7601)
USB adapter detected, controller type is: G29 PS4.
found pass-through device 0x054c:0x05c4
Timer resolution: min=156001 max=5000 current=5000
gusb.c:185 get_endpoint: no such endpoint: 0x84
No controller was found on USB buses.
gimx.c:208 SDL_main: no adapter detected
User avatar
Matlo
Posts: 5768
Joined: Wed Jul 06, 2011 7:01 am
Location: France
Contact:

Re: DIY Adapter not working

Post by Matlo »

Hi,
Uninstall USBDK, make sure to apply all Windows updates, reboot, and reinstall GIMX including USBDK at the end of the installation.
GIMX creator
User avatar
bad_bo
Posts: 44
Joined: Wed Nov 16, 2016 5:14 pm
Location: Canada

Re: DIY Adapter not working

Post by bad_bo »

Yep, this worked for me too. It is the USBDK issue.
Post Reply