Arduino Micro + Raspberry Pi3 + PS4

[esquinop]

Hi.

I have an Arduino Micro loaded with atmega32u4.hex connected to the GPIO of a Raspberry Pi3. GIMX 5.9 has been installed on the Pi3, DS4 connected to the PI3 as well as the Logitech G27.

When trying to start GIMX I get the following error: adapter_detect failed

I have swapped RX and TX to make sure that this is not the problem.

Please can someone assist.

[esquinop]

Image of setup

[img]
https://www.dropbox.com/s/c97oe2kn2dyb9 ... 3.jpg?dl=0
[/img]

Image of Log

[img]
https://www.dropbox.com/s/gu7ioz6txe8fc ... 4.jpg?dl=0
[/img]

[Matlo]

https://gimx.fr/wiki/index.php?title=RP ... _interface

[esquinop]

Hi Matlo

How many watts should the resistors be?

Regards,
Paul

[esquinop]

I added the resistors but am still getting the same error as posted previously.

[img]
https://www.dropbox.com/s/y1gnar0usyu1q ... 8.jpg?dl=0
[/img]

[Matlo]

Did you through the "Software adjustments" part of the wiki?
Did you turn the PS4 on before starting GIMX?

[esquinop]

Hi Matlo

I'm using the PS4 to power the PI so its on before i try and start GIMX.

is that the correct order?

[esquinop]

Hi Matlo

I have managed to get a Teensy 2++ controller. I have followed this tutorial

http://www.psx-place.com/threads/tutori ... g-pi.9744/

But get the same error as when I used the Arduino. What am i doing wrong? Why does GIMX not startup?

Regards, Paul

[Matlo]

Post a new log as text.

[esquinop]

Please see the log below.

global option -l with value `log.txt'
global option -c with value `LogitechG27_G29.xml'
controller #1: option -p with value `/dev/ttyAMA0'
now reading arguments for controller #2
grab flag is unset
status flag is set
subpos flag is set
force_updates flag is set
GIMX 5.9 ARMv6
Raspbian GNU/Linux 8.0 (jessie)
Linux 4.1.21-v7+ #873 SMP Mon Apr 11 18:22:10 BST 2016 unknown
Bus 001 Device 006: ID 045e:0745 Microsoft Corp. Nano Transceiver v1.0 for Blue$
Bus 001 Device 005: ID 046d:c294 Logitech, Inc. Driving Force
Bus 001 Device 004: ID 054c:05c4 Sony Corp.
Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. SMSC9512/9514 Fast$
Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=dwc_otg/1p, 480M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/5p, 480M
|__ Port 1: Dev 3, If 0, Class=Vendor Specific Class, Driver=smsc95xx, $
|__ Port 3: Dev 4, If 0, Class=Human Interface Device, Driver=usbhid, 1$
|__ Port 4: Dev 5, If 0, Class=Human Interface Device, Driver=usbhid, 1$
|__ Port 5: Dev 6, If 0, Class=Human Interface Device, Driver=usbhid, 1$
|__ Port 5: Dev 6, If 1, Class=Human Interface Device, Driver=usbhid, 1$
|__ Port 5: Dev 6, If 2, Class=Human Interface Device, Driver=usbhid, 1$
native mode command sent to HID device 01:01:04 (PID=c294)
native mode enabled for HID device 01:01:04 (PID=c29b)
serial_send
No controller detected.
adapter_detect failed