Hi All,
Thanks in Advance for the help.
I get the following message when trying to start the "Check" or the "Start" from the Launcher.
I have the xbox one controller plugged in and it is working, I can click the start button and win 10 prompts me, also in the gimxconfig I can auto detect the contoller and it responds to the button press from the controller.
I cannot seem to find a link to change the drivers to libusbk as suggested in other posts. Also I have tried leaving the controller off and starting the launcher and then started the controller, Switched the rx and tx to see if that made the difference, all to no avail.
The Com3 detects fine in the launcher, so I am stuck.
All help appreciated.
Cheers
Mike
Win 10 Xbox One joystick not found: X360 Controller (0)
-
- Posts: 12
- Joined: Sun Jun 05, 2016 6:14 am
-
- Posts: 12
- Joined: Sun Jun 05, 2016 6:14 am
Re: Win 10 Xbox One joystick not found: X360 Controller (0)
Hi Matlo,
I installed the driver as suggest, renaming the file copying it over and running Zadiag. All went through fine. Controller no longer turns on when connected as expected.
I now get a cannot detect x360 Controller and XInput controller.
The XInput Controller does appear in device manager. I retried swapping the pins over on the RX and TX to see but it still won't work. Also tried a different controller.
Here is a link to the Teensy Board I bought:
http://www.ebay.com.au/itm/321969885519 ... EBIDX%3AIT
Here is the UART Board:
http://www.ebay.com.au/itm/261949922912 ... EBIDX%3AIT
On the board In order the pins are as follows:
DTR
RXD
TXD
5V
CTS
GND
So I am using Pins 2,3 and 6...
Thoughts on what to try?
Cheers
I installed the driver as suggest, renaming the file copying it over and running Zadiag. All went through fine. Controller no longer turns on when connected as expected.
I now get a cannot detect x360 Controller and XInput controller.
The XInput Controller does appear in device manager. I retried swapping the pins over on the RX and TX to see but it still won't work. Also tried a different controller.
Here is a link to the Teensy Board I bought:
http://www.ebay.com.au/itm/321969885519 ... EBIDX%3AIT
Here is the UART Board:
http://www.ebay.com.au/itm/261949922912 ... EBIDX%3AIT
On the board In order the pins are as follows:
DTR
RXD
TXD
5V
CTS
GND
So I am using Pins 2,3 and 6...
Thoughts on what to try?
Cheers
-
- Posts: 12
- Joined: Sun Jun 05, 2016 6:14 am
Re: Win 10 Xbox One joystick not found: X360 Controller (0)
Here is the log:
global option -l with value `log.txt'
global option -c with value `XOnePadUsbXinput.xml'
controller #1: option -p with value `COM3'
now reading arguments for controller #2
status flag is set
subpos flag is set
force_updates flag is set
GIMX 5.8 x86_64
Windows 10 (or later) x64
Kernel version: 6.1 (7600)
Detected USB adapter: XOnePad.
Reset sent to the adapter.
No controller was found on USB buses.
adapter_detect failed
global option -l with value `log.txt'
global option -c with value `XOnePadUsbXinput.xml'
controller #1: option -p with value `COM3'
now reading arguments for controller #2
status flag is set
subpos flag is set
force_updates flag is set
GIMX 5.8 x86_64
Windows 10 (or later) x64
Kernel version: 6.1 (7600)
Detected USB adapter: XOnePad.
Reset sent to the adapter.
No controller was found on USB buses.
adapter_detect failed
Re: Win 10 Xbox One joystick not found: X360 Controller (0)
Are you trying to use a controller with 3.5mm jack? If yes, this is the problem. It's not supported yet.
GIMX creator
-
- Posts: 12
- Joined: Sun Jun 05, 2016 6:14 am
Re: Win 10 Xbox One joystick not found: X360 Controller (0)
All cables connected are USB.
To controller, from the Teensy to the Xbox One...
Thanks for the help here... really appreciate your help...
P.S I tried another UART board I bought as a backup...still no go
To controller, from the Teensy to the Xbox One...
Thanks for the help here... really appreciate your help...
P.S I tried another UART board I bought as a backup...still no go
Re: Win 10 Xbox One joystick not found: X360 Controller (0)
You did not answer the question. Does your controller have a 3.5mm female jack connector?
As said on the wiki, controllers with the 3.5mm jack are not supported yet.
As said on the wiki, controllers with the 3.5mm jack are not supported yet.
GIMX creator
-
- Posts: 12
- Joined: Sun Jun 05, 2016 6:14 am
Re: Win 10 Xbox One joystick not found: X360 Controller (0)
oh,
So I have to buy a standard controller without... thanks for the headsup...
So I have to buy a standard controller without... thanks for the headsup...
-
- Posts: 12
- Joined: Sun Jun 05, 2016 6:14 am
Re: Win 10 Xbox One joystick not found: X360 Controller (0)
I now have a controller without the 3.5mm jack,
Still not working...
HELP!
Still not working...
HELP!
-
- Posts: 12
- Joined: Sun Jun 05, 2016 6:14 am
Re: Win 10 Xbox One joystick not found: X360 Controller (0)
Just to confirm,
Does it need to be a fully wired controller or a wireless controller that is plugged in via the USB charge port?
Does it need to be a fully wired controller or a wireless controller that is plugged in via the USB charge port?