GIMX DIY USB/G27/PS4 Not Working

Need help? Ask here and someone will help
Post Reply
dasboot78
Posts: 3
Joined: Fri Jan 08, 2016 6:06 am

GIMX DIY USB/G27/PS4 Not Working

Post by dasboot78 »

Im trying to use a G27 wheel on the PS4. I have the DIY USB adapter, G27 wheel & DS4(turned off) connected to the PC. Every time I start GIMX it fails.
Here's the log-

option -l with value `log.txt'
option -c with value `LogitechG27_G29.xml'
option -p with value `COM3'
status flag is set
subpos flag is set
force_updates flag is set
native mode is already enabled for HID device \\?\hid#vid_046d&pid_c29b#6&f4a5b3f&1&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} (PID=c29b)
Detected USB adapter: G29 PS4.
libusb_init: Entity not found.
No controller was found on USB buses.
adapter_detect failed

I do fall in the "for dummies" category so I may have missed something easy but I've been reading on the forum for two days now & I believe I'm good on the hardware side. It seems like its a software issue with GIMX being able to see the DS4. Any ideas & help with this would be a greatly appreciated.

OS- Windows 10 x64
Adapter- DIY USB CP2102/Teensy2.0
GIMX version- 5.5x86_64
Firmwares- 5.4/EMUG29PS4/atmega32u4.hex
Console- PS4
Controller- Logitech G27 Wheel


EDIT/UPDATE Success! after looking into the connection issue with the DS4 I found that I had not installed usbdk from the tools folder in GIMX. After a quick download & install of said program everything is up and running. I knew I was missing something quite easy. HUGE THANKS to MATLO for developing this project and to all those who helped. You just saved me $300 on a new racing wheel.
Post Reply