Hello List, Matlo, in https://gimx.fr/wiki/index.php?title=RPi , chapter "USB adapter using the on-board UART interface/Sotware adjustments", shouldn't there be an entry stating we should use -p /dev/ttyAMA0 when starting Gimx... Sorry if I'm pointing the obvious, but hey I had to look for it, so I thought it might help.
jrb.
RPI serial port device name /dev/ttyAMA0
Re: RPI serial port device name /dev/ttyAMA0
Hi, I did a few changes. Let me know if it's still unclear.
GIMX creator
Re: RPI serial port device name /dev/ttyAMA0
Ok I found it looking at "recent changes diff", I guess it's ok, I would have add the note in "Software ajustments", but you're the boss ! Thank's
Re: RPI serial port device name /dev/ttyAMA0
Hello, well it looks like RPI 3 uses ttyS0, a miniUART, but I'm not sure it has enough baudrate, it is intended for console use. I didn't test it yet... The ttyAMA0 is used for the bluetooth, there might be ways to use it...