Hi
Just to confirm when you press start is the console powered up as it can give that error when you try and run it before the adapter is powered from the console side.
Have you tried a different cable between the adapter and console your soldering looks good to me.
Search found 234 matches
- Tue Mar 09, 2021 5:53 am
- Forum: Support
- Topic: Arduino builder error
- Replies: 1
- Views: 2042
Re: Arduino builder error
Hi I split your post to make it easier in future if you have an issue don't post under an old topic as it might get missed. As for your issue are you following the correct procedure when programming the board, could you also post clear pictures of your adapter and are you using the latest version of...
- Sat Mar 06, 2021 2:04 pm
- Forum: GIMX Discussion
- Topic: cronusmax gimx authenticate
- Replies: 1
- Views: 2153
Re: cronusmax gimx authenticate
On what console do you want to use it because it will normally display AU on the display when waiting for authentication, even GIMX requires a genuine gamepad for PS4, Xbox One and Xbox 360 to authenticate.
- Mon Mar 01, 2021 6:51 am
- Forum: Support
- Topic: Adapter Not Detected on One Computer
- Replies: 8
- Views: 5503
Re: Adapter Not Detected on One Computer
Glad its working, as for the port not showing I know some programs like the ones used to monitor a UPS could cause the port to be non accessible but you could check all the programs in your startup to check if there is anything that could be causing it.
- Sun Feb 28, 2021 9:16 am
- Forum: Support
- Topic: Adapter Not Detected on One Computer
- Replies: 8
- Views: 5503
Re: Adapter Not Detected on One Computer
Are you connecting it directly or using a USB Hub ?
Could you also please post the driver version you are using.
Could you also please post the driver version you are using.
- Tue Feb 09, 2021 5:16 pm
- Forum: Support
- Topic: pressing the ps key did not work
- Replies: 3
- Views: 2840
Re: pressing the ps key did not work
Hi
For that config the PS button is bound to backspace can you confirm if you pressed it, you can use the fps config utility to remap it to another key and try again
For that config the PS button is bound to backspace can you confirm if you pressed it, you can use the fps config utility to remap it to another key and try again
- Tue Feb 02, 2021 8:39 am
- Forum: General Discussion
- Topic: Raspberry Pi Pico, $4 microcontroller board from Raspberry Pi
- Replies: 3
- Views: 18150
Re: Raspberry Pi Pico, $4 microcontroller board from Raspberry Pi
They are neat little boards I picked up a few, as for your question at the moment they wont work as the firmware will have to be rewritten as the are quite different from reading I have done.
- Thu Jan 21, 2021 1:37 pm
- Forum: Support
- Topic: Gimx Emulator don't work after firmware update*Now works, but have c:376 issue.*
- Replies: 7
- Views: 3515
Re: Gimx Emulator don't work after firmware update*Now works, but have c:376 issue.*
Yes you set messages to log file the command window will be blank until you exit or it shuts down then it will open a text document with the log
- Wed Jan 20, 2021 2:37 pm
- Forum: Support
- Topic: Gimx Emulator don't work after firmware update*Now works, but have c:376 issue.*
- Replies: 7
- Views: 3515
Re: Gimx Emulator don't work after firmware update*Now works, but have c:376 issue.*
Hi
I would recommend soldering the wires to the adapter as it gives a more stable connection. Can you create a log file and wait for the disconnect to happen and upload it to pastebin and post link here.
I would recommend soldering the wires to the adapter as it gives a more stable connection. Can you create a log file and wait for the disconnect to happen and upload it to pastebin and post link here.
- Wed Jan 13, 2021 12:32 pm
- Forum: Support
- Topic: xbox360 with ds4 incorrect mapping issue
- Replies: 10
- Views: 6115
Re: xbox360 with ds4 incorrect mapping issue
Hi
If you open the file with the config editor is the type set to 360pad ? From the log file it looks like its still set to Dualshock 4
If you open the file with the config editor is the type set to 360pad ? From the log file it looks like its still set to Dualshock 4