Search found 9 matches
- Sun Apr 26, 2020 2:26 pm
- Forum: Support
- Topic: adapter issue
- Replies: 17
- Views: 10948
Re: adapter issue
Your port is probably ok, in my case I could only load it if I did a hard reset on the board but after loading it would not respond on the xbox I was helping someone with. After I got another pro micro and programmed it it worked. I must say this is really a tough one as everything looks good. Afte...
- Sun Apr 26, 2020 11:45 am
- Forum: Support
- Topic: adapter issue
- Replies: 17
- Views: 10948
Re: adapter issue
According to the log file it looks like your wiring is correct, but can I maybe ask that you post clear pictures of your adapter. This is a list of things I would check. 1. Reload the firmware on your Arduino 2. Wiring connections 3. Try different USB ports and if possible avoid USB hubs 4. Replace...
- Sun Apr 26, 2020 9:46 am
- Forum: Support
- Topic: adapter issue
- Replies: 17
- Views: 10948
Re: adapter issue
I replaced cable, it didn't helpkaiba_seto2004 wrote: ↑Fri Apr 24, 2020 1:31 am So I guess you need to replace cable from gimx to ps4.
- Thu Apr 23, 2020 10:34 am
- Forum: Support
- Topic: adapter issue
- Replies: 17
- Views: 10948
Re: adapter issue
In this log you can see that i press PS on the DS4 and on the wheel. GIMX sees it but nothing happens.
https://pastebin.com/wWPXrP9m
https://pastebin.com/wWPXrP9m
- Thu Apr 23, 2020 10:14 am
- Forum: Support
- Topic: adapter issue
- Replies: 17
- Views: 10948
Re: adapter issue
I know, i pressed it. I still can't press the PS button.
- Wed Apr 22, 2020 2:12 pm
- Forum: Support
- Topic: adapter issue
- Replies: 17
- Views: 10948
Re: adapter issue
yeah, i've already tried to rebind Ps button, it doesn't help. And i selected option for multiple mice and keyboards? it also didn't help. I also just tried to start GIMX when the both sides of GIMX were plugged into PC, so windows detected G29 and said that it is ready to use. So PS4 sees the G29 t...
- Wed Apr 22, 2020 1:11 pm
- Forum: Support
- Topic: adapter issue
- Replies: 17
- Views: 10948
Re: adapter issue
Logitech Gaming Software is installed. I use original Arduino cable between the playstation and pro micro. However i tried another one although Arduino cable is 100% good. Wheel works correctly under Windows, no any problems. I am going to play GTS and Dirt Rally 2.0 but it never came to playing. I ...
- Wed Apr 22, 2020 9:27 am
- Forum: Support
- Topic: adapter issue
- Replies: 17
- Views: 10948
Re: adapter issue
Yes, i tried to assign PS Button to different buttons of keyboard and wheel but it didn't help. Should i do any settings on my ps4 and what else can i do?
- Tue Apr 21, 2020 9:12 pm
- Forum: Support
- Topic: adapter issue
- Replies: 17
- Views: 10948
adapter issue
I made a GIMX using an Arduino Pro micro and CP2102. Downloaded GIMX 7.15, loaded EMUG29PS4 firmware successfully. Used config LogitechG27_G29 ( i own G27 and PS4 slim) and at the moment where i have to press PS button, i can't just do it. I press it but nothing happens. I connect Dualshock when it'...