Search found 217 matches
- Thu Jan 21, 2021 1:37 pm
- Forum: Support
- Topic: Gimx Emulator don't work after firmware update*Now works, but have c:376 issue.*
- Replies: 7
- Views: 195
Re: Gimx Emulator don't work after firmware update*Now works, but have c:376 issue.*
Yes you set messages to log file the command window will be blank until you exit or it shuts down then it will open a text document with the log
- Wed Jan 20, 2021 2:37 pm
- Forum: Support
- Topic: Gimx Emulator don't work after firmware update*Now works, but have c:376 issue.*
- Replies: 7
- Views: 195
Re: Gimx Emulator don't work after firmware update*Now works, but have c:376 issue.*
Hi
I would recommend soldering the wires to the adapter as it gives a more stable connection. Can you create a log file and wait for the disconnect to happen and upload it to pastebin and post link here.
I would recommend soldering the wires to the adapter as it gives a more stable connection. Can you create a log file and wait for the disconnect to happen and upload it to pastebin and post link here.
- Wed Jan 13, 2021 12:32 pm
- Forum: Support
- Topic: xbox360 with ds4 incorrect mapping issue
- Replies: 7
- Views: 297
Re: xbox360 with ds4 incorrect mapping issue
Hi
If you open the file with the config editor is the type set to 360pad ? From the log file it looks like its still set to Dualshock 4
If you open the file with the config editor is the type set to 360pad ? From the log file it looks like its still set to Dualshock 4
- Sun Jan 10, 2021 12:52 pm
- Forum: Support
- Topic: dpkg: Fehler beim Bearbeiten des Archivs /home/pi/Downloads/gimx_8.0-1_armhf.deb (--unpack): Versuch, »/usr/bin/bdaddr«
- Replies: 1
- Views: 123
Re: dpkg: Fehler beim Bearbeiten des Archivs /home/pi/Downloads/gimx_8.0-1_armhf.deb (--unpack): Versuch, »/usr/bin/bda
Hi
Run the following commands
Run the following commands
Code: Select all
sudo dpkg --force-overwrite -i gimx_8.0-1_armhf.deb
sudo apt-get install -f
Re: GIMX DIY
That board should work
Re: GIMX DIY
Hi
The 328p wont work you need a board with the atmega32u4
https://www.ebay.com/itm/1PCS-Pro-Micro ... N&LH_BIN=1
The 328p wont work you need a board with the atmega32u4
https://www.ebay.com/itm/1PCS-Pro-Micro ... N&LH_BIN=1
- Mon Jan 04, 2021 4:27 am
- Forum: Support
- Topic: Controller Hangs after 10 mins
- Replies: 4
- Views: 217
Re: Controller Hangs after 10 mins
Just a quick question, the controller you are using for authentication is it a genuine controller or one of those generic ones?
- Sun Dec 27, 2020 2:23 pm
- Forum: Support
- Topic: Thrustmaster 3 in 1 GIMX Logfile "access is denied"
- Replies: 10
- Views: 640
Re: Thrustmaster 3 in 1 GIMX Logfile "access is denied"
Hi
The error you get can be safely ignored, just to confirm the controller should be off. Just check what key is assigned to PS or just remap it and try again. The config type G29 PS4 is correct for your application.
The error you get can be safely ignored, just to confirm the controller should be off. Just check what key is assigned to PS or just remap it and try again. The config type G29 PS4 is correct for your application.
- Mon Dec 21, 2020 4:56 am
- Forum: Support
- Topic: 8 months working flawlessly now broken?
- Replies: 5
- Views: 833
Re: 8 months working flawlessly now broken?
When you got the cable were you already using the latest version of GIMX 8.0 or was it 7.15 because if you updated to 8.0 you have to update the firmware as well otherwise it will not work.
- Sat Dec 05, 2020 4:59 am
- Forum: Support
- Topic: Can i use a different brand of pedals on the PS4
- Replies: 1
- Views: 344
Re: Can i use a different brand of pedals on the PS4
Hi
As long as you map the pedal axis in the config they will work
As long as you map the pedal axis in the config they will work