Export translations

Settings

Group
Language
Format	Export for off-line translation Export in native format

<languages />
It's possible to configure keyboard/mouse/joystick macros: a key or button press can trigger a series of keyboard/mouse/joystick events, with timing conditions.

==Directory==

Macros have to be defined in files saved into:
* Ubuntu: the ~/.gimx/macros directory. ~ is the home directory, and .gimx folder is hidden (in the file manager, press ctrl+h to display hidden folders).
* Windows: the C:\Users\<username>\AppData\Roaming\gimx\macros directory.

GIMX 1.12 and older:
* Ubuntu: the ~/.emuclient/macros directory. ~ is the home directory, and .emuclient folder is hidden (in the file manager, press ctrl+h to display hidden folders).
* Windows: the C:\Users\<username>\AppData\Roaming\emuclient\macros directory.

GIMX 0.51 and older:
* Windows 32bits: the C:\Program Files\GIMX\macros directory.
* Windows 64bits: the C:\Program Files (x86)\GIMX\macros directory.

==Syntax==

<pre>MACRO <DEVICE EVENT> <ID> <RANGE>
<DEVICE EVENT> <ID> <VALUE>
DELAY <MS>
#<COMMENT></pre>

*<DEVICE EVENT>: KEYDOWN, KEYUP, MBUTTON, MBUTTONDOWN, MBUTTONUP, JBUTTON, JBUTTONDOWN, JBUTTONUP, MAXIS, JAXIS
*<ID>: the event id (case sensitive) as displayed in gimx-config
*<VALUE>: the axis value (only for MAXIS and JAXIS)
*<RANGE>: the axis range (only for MAXIS and JAXIS); the syntax is [min,max] with min and max in [-32768,32767]; example: [8192,16384]
*<MS>: integer value in milliseconds
*<COMMENT>: a comment, not interpreted ('#' is the first character of the line)

==Commands==

* KEYDOWN: keyboard key pressed
* KEYUP: keyboard key released
* KEY: KEYDOWN + DELAY 50 + KEYUP

* MBUTTONDOWN: mouse button pressed
* MBUTTONUP: mouse button released
* MBUTTON: MBUTTONDOWN + DELAY 50 + MBUTTONUP

* JBUTTONDOWN: joystick button pressed
* JBUTTONUP: joystick button released
* JBUTTON: JBUTTONDOWN + DELAY 50 + JBUTTONUP

* DELAY: delay in milliseconds

* MAXIS: mouse axis moved; ID: 0 for x axis, and 1 for y axis; VALUE: positive values for right and down

* JAXIS: joystick axis moved; ID: the axis id as displayed in gimx-config; VALUE: in [-32768 .. 32767] for centered axes, and in [0 .. 32767] for non-centered axes

==Macro activation==

This section is only applicable since GIMX 1.00.

It is possible to specify the macro files to be read for each configuration file. 
This can be configured in a file named "configs.txt", located in the macros directory. 
Example:
<pre>#If config1.xml is loaded, macro1.txt is read.
config1.xml/macro1.txt
#If config1.xml is loaded, macro2.txt is read.
config1.xml/macro2.txt
#If config2.xml is loaded, macro2.txt is read.
config2.xml/macro2.txt</pre>
Lines beginning with a # are not interpreted. 
Since GIMX 4.0 the separator is a slash so as to allow using file names containing spaces.

It is also possible to define activation triggers within the macro definition. 
The syntax is:
<pre>TRIGGER <event></pre>
Example:
<pre>MACRO F1
#content

MACRO F2
TRIGGER F5
#content

MACRO F3
TRIGGER F6
#content

MACRO F4
TRIGGER F5
#content</pre>
With GIMX 1.12 and earlier, the above example works the following way: 
F1 remains active all the time as there is no trigger specified. 
F2 and F4 are default active. If F6 is pressed, F3 becomes active, F2 and F4 become inactive. 
With GIMX 2.00: 
Macros with a trigger are default inactive. To make a macro with trigger default active, add a line containing "INIT ON" after the "TRIGGER <event>" line. 
Macros with a trigger can work with a toggle mode, which allows to activate and deactivate a macro autonomously: activating a togglable macro has no impact on other macros, and activating another macro has no impact on a togglable macro. This can be configured adding a line containing "TOGGLE YES" after the "TRIGGER <event>" line. 
Example:
<pre>MACRO F1
TRIGGER 1
INIT ON
TOGGLE YES
#content</pre>

==Notes==

===Delay precision===

The delay precision depends on the controller update period:
* ds3/bluetooth = 11.25ms
* ds3/usb = 10ms
* ds4/bluetooth = 10ms
* ds4/usb = 10ms
* 360 pad = 8ms
* XOne pad = 4ms
If you specify a delay that is not a multiple of the precision, the resulting delay will be the lowest multiple of the precision higher than the specified delay. 
For example, if the precision is 11.25ms and the delay is 12ms, the resulting delay will be 22.50ms (=2*11.25ms).

===Macro loop===

To make a macro loop, just add a matching KEYDOWN, MBUTTONDOWN or JBUTTONDOWN command at the end of the macro. 
Example:
<pre>MACRO MBUTTONDOWN BUTTON_LEFT
#content
MBUTTONDOWN BUTTON_LEFT</pre>

The macro is triggered by pressing 'BUTTON_LEFT'. 
The last command of the macro restarts the macro, creating a loop. 
To stop a macro loop, just press the trigger again. The macro is stopped immediately, and the state of the controller is unchanged.

===Multiple keyboards/mice/joysticks===

In case multiple keyboards or mice or joysticks are used, it's not possible to specify the device for which events are generated. 
Events are generated for the first keyboard/mouse/joystick found in the configuration.

==Examples==

===Rapid fire macro===

<pre>MACRO MBUTTONDOWN BUTTON_LEFT
KEYDOWN p
#Set delay no less than the maximum rate of fire
#10 rounds per second (600 rpm)
DELAY 100
KEYUP p
#~Do not set delay after keyup or it will negatively impact automatic weapons
MBUTTONDOWN BUTTON_LEFT
 
MACRO MBUTTONUP BUTTON_LEFT
MBUTTONDOWN BUTTON_LEFT
#Sometimes the fire key can be stuck down after the macro ends this releases it after the macro has been terminated
KEYUP p</pre>

In gimx-config, bind 'p' to r1 in both hip fire and ADS profiles (profiles 1 and 2). 
DO NOT bind 'BUTTON_LEFT' to r1 in both hip fire and ADS profiles.

The macro is triggered by pressing the left mouse button. 
The last command of the first macro restarts the macro, creating a loop. 
Upon the release of the left mouse button the second macro ends the loop of the first macro.

===Recoil macro===

<pre>MACRO KEYDOWN o
MAXIS 1 25
KEYDOWN o

MACRO MBUTTONDOWN BUTTON_LEFT
KEYDOWN o

MACRO MBUTTONUP BUTTON_LEFT
KEYDOWN o</pre>

Change '25' with the value that cancels the recoil.

Export translations

Navigation menu

Personal tools

Namespaces

Variants

Views

More

Search

Navigation

Tools