Difference between revisions of "Template:InstallationNext"

Revision as of 19:13, 8 November 2017

This is required to prevent Windows from turning off the controller or the USB to UART adapter.

Open the Device Manager.
Right click on the USB HUB (make sure to select the right one) > Properties > Power management > Uncheck "Allow the computer to turn off this device to save power".
Right click on the COM port > Properties > Power management > Uncheck "Allow the computer to turn off this device to save power".

Install all Windows updates (otherwise USBDK may fail to work properly, resulting in GIMX failures)
Create a system restore point, in case something goes wrong (USBDK was known to create instability on some systems)

If you are running from a Live CD or a Live USB, you have to manually refresh software sources:

After making sure you've filled requirements you can proceed to installing GIMX software itself.

The setup file includes the following installers:

CP210x driver - required when using a CP2102 USB to UART adapter
USBDK driver - required when using a console that needs controller authentication

LibusbK can be used as an alternative to USBDK. (Optional, not recommended)

Rename the libusb-1.0.dll file from the C:\Program Files\GIMX folder to libusb-1.0.dll.bk.
Download this libusb package: link.
Open it (with 7zip for example) and extract the libusb-1.0.dll file from the /mingw64/bin/ folder to the C:\Program Files\GIMX folder.
Install the libusbk driver as explained below.

Note: the libusb-1.0.dll file will be replaced after updating GIMX. Perform the above steps again to keep using libusbK.

@@ Line 33: / Line 33: @@
 * click on the drop down menu, and select "Install Driver"
 * click on "Replace Driver"
-|}}====Disable power saving for USB devices====
+|}}
+====Disable power saving for USB devices====
 This is required to prevent Windows from turning off the controller or the USB to UART adapter.