Hello all,
I don't know, here is right place for this topic. First of all, I want to apologize.
I want to make a car racing simulator for "Logitech G27" . But there are a lot of questions. Logitech G27 will be used on PS3 or PC or another platform. Can I listen USB data between the Logitech G27 and game machine without damaging the game protocol?
I want to make a simulator with any embedded platform(arm9 or cortex a9) that will have 4 servo motor for moving the platform and an USB input for listening the data from Logitech G27 to PC and from PC to Logitech G27.
Can I make a USB dongle that has one input(for Logitech G27 ) and two output(one of them is for game machine(PS3 or PC) and the other one is for my simulator for listening the data.
Thanks.
Mehmet
Car racing simulator
Re: Car racing simulator
Hi,
What you need is a platform with usb host capabilities (to plug the G27) and usb device capabilities (to interface with a PC/PS3 as a G27).
GIMX does something like this using a PC (host) and a DIY USB adapter (device).
What you need is a platform with usb host capabilities (to plug the G27) and usb device capabilities (to interface with a PC/PS3 as a G27).
GIMX does something like this using a PC (host) and a DIY USB adapter (device).
GIMX creator
Re: Car racing simulator
Hello Matlo,
Thanks for your response. I checked DIY USB Adapter, that is a USB/Serial converter. I couldn't understand that Logitect G27 seems to PS3 like a serial port, or PS3 can work with a serial port? Is there any open protocol for this issue? If so, it is easy. I think to use beaglebone for this project, Beaglebone has Logitect G27 driver and can listen it than can send to PS3 over USB/serial converter.
Thanks
Mehmet
Thanks for your response. I checked DIY USB Adapter, that is a USB/Serial converter. I couldn't understand that Logitect G27 seems to PS3 like a serial port, or PS3 can work with a serial port? Is there any open protocol for this issue? If so, it is easy. I think to use beaglebone for this project, Beaglebone has Logitect G27 driver and can listen it than can send to PS3 over USB/serial converter.
Thanks
Mehmet
Re: Car racing simulator
Matlo,
I found your below topic about Beagleboard USB sniffer project.
http://blog.gimx.fr/?p=61
In fact I need this project. I think to build this project for beaglebone. It has USB Host and USB OTG device. The project is for beagleboard but You had bought beagleboard-xm. They are not same. Could you try it beagleboard-xm?
Nicolas Boichat had given all of linux source, I couldn't find related drivers. I don't know which sources Nicolas had written for this project. How and where can I start for Beaglebone.
Sorry for my English.
Thanks.
Mehmet
I found your below topic about Beagleboard USB sniffer project.
http://blog.gimx.fr/?p=61
In fact I need this project. I think to build this project for beaglebone. It has USB Host and USB OTG device. The project is for beagleboard but You had bought beagleboard-xm. They are not same. Could you try it beagleboard-xm?
Nicolas Boichat had given all of linux source, I couldn't find related drivers. I don't know which sources Nicolas had written for this project. How and where can I start for Beaglebone.
Sorry for my English.
Thanks.
Mehmet
Re: Car racing simulator
Hi Guys,
I see that this post is a few time ago but I am at the same point in a project.
I want to use a Beaglebone Black as a device for my PC (Host) that emulates the G27 Wheel and get the data from an Original G27 Wheel on my Beaglebone via On-board USB-Host port.
Can I get the data through the Beaglebone and am I able to use the G27 wheel (Original) to control my game (Project CARS)?
Is there maybe a config how to steer a G27 wheel with my Beaglebone?
Thanks for replying
AND_1
I see that this post is a few time ago but I am at the same point in a project.
I want to use a Beaglebone Black as a device for my PC (Host) that emulates the G27 Wheel and get the data from an Original G27 Wheel on my Beaglebone via On-board USB-Host port.
Can I get the data through the Beaglebone and am I able to use the G27 wheel (Original) to control my game (Project CARS)?
Is there maybe a config how to steer a G27 wheel with my Beaglebone?
Thanks for replying
AND_1
Re: Car racing simulator
Hi,
Running GIMX on a BeagleBone Black should be possible, but you'll get a lot of issues to solve.
The first issue is to compile GIMX for this target. Sadly I don't have much time to help here...
Running GIMX on the same PC will be much easier.
Running GIMX on a BeagleBone Black should be possible, but you'll get a lot of issues to solve.
The first issue is to compile GIMX for this target. Sadly I don't have much time to help here...
Running GIMX on the same PC will be much easier.
GIMX creator
- George Williams
- Posts: 1
- Joined: Thu Sep 21, 2017 8:49 am
Re: Car racing simulator
Thanks for providing this information.