I need some help getting this to work (ps4)
Posted: Wed Dec 21, 2016 6:10 pm
I just got my usb adapter already built from the website steve-marton.com/gimx/?product=diy-usb-adapter-for-gimx
I can't get my wheel to work and don't know why. So any help would be appreciated
These are the steps I followed.
1-Installed GIMX (it seem that it also installed the usbk driver by itself, but didn't notice any CP210x driver)
2-Turned on my ps4 directly from the power button
2- Connected the usb adapter to the PC
3-Connected the wheel to the pc and installed logitech gaming software
4-Connected the DS4 to the pc while it was off (it now has an orange light, like if it was charging)
5- connected the micro usb cable to the other side of the adapter and then to the ps4
6-Opened GIMX launcher, selected my wheel's config, logitechDrivingForceGT_g29 - checked config - this config seems ok
7- pressed start, this is what the cmd screen looks like - https://gyazo.com/1b9b365c38792327480f87c1fd2220cd
8-Pressed the PS button on the driving force gt, nothing happens. Nothing is responding.
Edit: Just found out how to get a log file. And this is what it's showing
global option -l with value `log.txt'
global option -c with value `LogitechDrivingForceGT_G29.xml'
controller #1: option -p with value `COM4'
now reading arguments for controller #2
status flag is set
subpos flag is set
force_updates flag is set
GIMX 6.3 x86_64
Windows 7 SP1 x64
Kernel version: 6.1 (7601)
USB adapter detected, controller type is: G29 PS4.
found pass-through device 0x054c:0x05c4
Timer resolution: min=156001 max=5000 current=5000
using default refresh period: 5.00ms
macros are not available for: joystick PS4 Controller (0)
Warning: can't open macro directory C:\Users\lap\AppData\Roaming//gimx//macros/
0 1482345511.903004
I can't get my wheel to work and don't know why. So any help would be appreciated
These are the steps I followed.
1-Installed GIMX (it seem that it also installed the usbk driver by itself, but didn't notice any CP210x driver)
2-Turned on my ps4 directly from the power button
2- Connected the usb adapter to the PC
3-Connected the wheel to the pc and installed logitech gaming software
4-Connected the DS4 to the pc while it was off (it now has an orange light, like if it was charging)
5- connected the micro usb cable to the other side of the adapter and then to the ps4
6-Opened GIMX launcher, selected my wheel's config, logitechDrivingForceGT_g29 - checked config - this config seems ok
7- pressed start, this is what the cmd screen looks like - https://gyazo.com/1b9b365c38792327480f87c1fd2220cd
8-Pressed the PS button on the driving force gt, nothing happens. Nothing is responding.
Edit: Just found out how to get a log file. And this is what it's showing
global option -l with value `log.txt'
global option -c with value `LogitechDrivingForceGT_G29.xml'
controller #1: option -p with value `COM4'
now reading arguments for controller #2
status flag is set
subpos flag is set
force_updates flag is set
GIMX 6.3 x86_64
Windows 7 SP1 x64
Kernel version: 6.1 (7601)
USB adapter detected, controller type is: G29 PS4.
found pass-through device 0x054c:0x05c4
Timer resolution: min=156001 max=5000 current=5000
using default refresh period: 5.00ms
macros are not available for: joystick PS4 Controller (0)
Warning: can't open macro directory C:\Users\lap\AppData\Roaming//gimx//macros/
0 1482345511.903004