Game Input MultipleXer

I ran the test again, this time i reconnect the cables and found the DS4: http://i.imgur.com/gXVI1Hj.png

This is what my set-up looks like: http://imgur.com/a/rf9wM

Edit: The Teensy board is connected to the ps4.

The CP2102 adapter may be faulty.
You can test it following the instructions at:
http://gimx.fr/wiki/index.php?title=FAQ ... adapter.3F

Yea the CP2102 is not being read.

Shame. Thanks for the help, gonna order a new one!

I got a new board that works!

I still get the same error though. Not sure where to go from here. Still says no joystick when I run check.


I thought that maybe I'm a dumbass and didn't read it well, so here are the steps that I do when trying to run it.

1) Turn PS4 on with Teensy plugged in to the PS4.
2) With controller already plugged into computer(It's off), open gimx launcher.
3) Run Gimx- get nothing.

USB to UART board wiring is correct (I think)

Any help would be great!

Did you try to press the PS button?

On the keyboard (the bind) yes, On the PS4 controller i though it had to be off.
When I check the terminal button this shows: http://i.imgur.com/sGGqBMO.png

The wiki says:

PS4: it is required to have a genuine DS4 wired to the PC all the time. Once GIMX is started, press the key that is mapped to PS to activate the controller.

http://gimx.fr/wiki/index.php?title=Qui ... _adapter_2

Yup im doing that. Still not working.

Did you replace the controller driver with the libusbK one?

Yes I have.