PS4 - manual & conf

DrSpace · Post by **DrSpace** » Thu Apr 10, 2014 6:53 pm

Matlo,

I've tried the options you indicabas, although the above does not really do what had shown that he had come to try and indicate your instructions.
I fail to understand that I'm running or step that is missing to make it work.

Under steps and repetitions, but never get it to work or activate.

http://imageshack.com/a/img196/6745/5b39.jpg

Code: Select all

unix@iunix:~$ sudo ./gimx-ps4-helper.sh 
[sudo] password for unix: 
sudo: ./gimx-ps4-helper.sh: orden no encontrada
unix@iunix:~$ sudo ./gimx-ps4-helper.sh 
sudo: ./gimx-ps4-helper.sh: orden no encontrada
unix@iunix:~$ cd GIMX/
unix@iunix:~/GIMX$ git pull
Already up-to-date.
unix@iunix:~/GIMX$ clear
unix@iunix:~/GIMX$ sudo ./gimx-ps4-helper.sh 
Unplug any Dualshock 4.
Unplug any teensy.
Unpug the bluetooth dongle.
Then press enter.

Plug the bluetooth dongle.
The bluetooth dongle address is 00:15:83:36:30:6C.
The bluetooth hci number is 0.
Plug the DS4 with a USB cable.
The DS4 address is A4:15:66:83:98:58.
Unplug the DS4.
Plug the teensy.
Unplug the teensy.
Plug the teensy to the PS4, and wait a few seconds.
Then plug the teensy back to the PC.
The PS4 address is B0:05:94:68:96:4E.
Everything was successful: setting dongle link keys.
To run gimx, type:
gimx -t DS4 -c config.xml -h 0 -b B0:05:94:68:96:4E
unix@iunix:~/GIMX$ sudo service bluetooth stop
bluetooth stop/waiting
unix@iunix:~/GIMX$ sudo hciconfig hci0 up pscan
unix@iunix:~/GIMX$ gimx -t DS4 -c PS4_KillZoneShadowFall.xml -h 0 -b B0:05:94:68:96:4E
option -t with value `DS4'
option -c with value `PS4_KillZoneShadowFall.xml'
option -h with value `0'
option -b with value `B0:05:94:68:96:4E'
using default refresh period: 10.00ms

Test...

Code: Select all

unix@iunix:~/GIMX$ gimx -t DS4 -c PS4_KillZoneShadowFall.xml -h 0 -b B0:05:94:68:96:4E
option -t with value `DS4'
option -c with value `PS4_KillZoneShadowFall.xml'
option -h with value `0'
option -b with value `B0:05:94:68:96:4E'
using default refresh period: 10.00ms
unix@iunix:~/GIMX$ sudo service bluetooth stop
stop: Unknown instance: 
unix@iunix:~/GIMX$ sudo hciconfig hci0 up pscan
unix@iunix:~/GIMX$ gimx -t DS4 -c PS4_KillZoneShadowFall.xml -h 0 -b B0:05:94:68:96:4E
option -t with value `DS4'
option -c with value `PS4_KillZoneShadowFall.xml'
option -h with value `0'
option -b with value `B0:05:94:68:96:4E'
using default refresh period: 10.00ms
unix@iunix:~/GIMX$ gimx -t DS4 -c PS4_KillZoneShadowFall.xml -h 0 -b B0:05:94:68:96:4E
option -t with value `DS4'
option -c with value `PS4_KillZoneShadowFall.xml'
option -h with value `0'
option -b with value `B0:05:94:68:96:4E'
using default refresh period: 10.00ms
unix@iunix:~/GIMX$ sudo hciconfig hci0 up pscan
unix@iunix:~/GIMX$ gimx -t DS4 -c PS4_KillZoneShadowFall.xml -h 0 -b B0:05:94:68:96:4E
option -t with value `DS4'
option -c with value `PS4_KillZoneShadowFall.xml'
option -h with value `0'
option -b with value `B0:05:94:68:96:4E'
using default refresh period: 10.00ms
unix@iunix:~/GIMX$ sudo service bluetooth stop
stop: Unknown instance: 
unix@iunix:~/GIMX$ sudo hciconfig hci0 up pscan
unix@iunix:~/GIMX$ sudo ./gimx-ps4-helper.sh 
Unplug any Dualshock 4.
Unplug any teensy.
Unpug the bluetooth dongle.
Then press enter.

Plug the bluetooth dongle.
The bluetooth dongle address is 00:15:83:36:30:6C.
The bluetooth hci number is 0.
Plug the DS4 with a USB cable.
The DS4 address is A4:15:66:83:98:58.
Unplug the DS4.
Plug the teensy.
Unplug the teensy.
Plug the teensy to the PS4, and wait a few seconds.
Then plug the teensy back to the PC.
The PS4 address is B0:05:94:68:96:4E.
Everything was successful: setting dongle link keys.
To run gimx, type:
gimx -t DS4 -c config.xml -h 0 -b B0:05:94:68:96:4E
unix@iunix:~/GIMX$ sudo service bluetooth stop
stop: Unknown instance: 
unix@iunix:~/GIMX$ sudo hciconfig hci0 up pscan
unix@iunix:~/GIMX$ gimx -t DS4 -c PS4_KillZoneShadowFall.xml -h 0 -b B0:05:94:68:96:4E
option -t with value `DS4'
option -c with value `PS4_KillZoneShadowFall.xml'
option -h with value `0'
option -b with value `B0:05:94:68:96:4E'
using default refresh period: 10.00ms
unix@iunix:~/GIMX$

....

https://imagizer.imageshack.us/v2/769x5 ... 6/5b39.jpg

Post by **Matlo** » Thu Apr 10, 2014 7:40 pm

Code: Select all

unix@iunix:~/GIMX$ gimx -t DS4 -c PS4_KillZoneShadowFall.xml -h 0 -b B0:05:94:68:96:4E
option -t with value `DS4'
option -c with value `PS4_KillZoneShadowFall.xml'
option -h with value `0'
option -b with value `B0:05:94:68:96:4E'
using default refresh period: 10.00ms

When you are at this point you just have to power on the DS4. This is explicitly said in the instructions:

Code: Select all

Start the DS4. It should connect to GIMX, which in turn should connect to the PS4.

DrSpace · Post by **DrSpace** » Thu Apr 10, 2014 7:51 pm

When I'm in the process I start following the DS4 command or log the PS button = "x"?

Code: Select all


unix@iunix:~/GIMX$ gimx -t DS4 -c PS4_KillZoneShadowFall.xml -h 0 -b B0:05:94:68:96:4E
option -t with value `DS4'
option -c with value `PS4_KillZoneShadowFall.xml'
option -h with value `0'
option -b with value `B0:05:94:68:96:4E'
using default refresh period: 10.00ms

Which bluetooth would you recommend? me the following bluetooth that I have:

SITECOM

Code: Select all


unix@iunix:~/GIMX$ hciconfig -a hci0
hci0:	Type: BR/EDR  Bus: USB
	BD Address: 00:09:DD:50:86:80  ACL MTU: 310:10  SCO MTU: 64:8
	UP RUNNING PSCAN AUTH ENCRYPT 
	RX bytes:669 acl:0 sco:0 events:43 errors:0
	TX bytes:492 acl:0 sco:0 commands:42 errors:0
	Features: 0xff 0xff 0x8f 0xfe 0xdb 0xff 0x5b 0x87
	Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 
	Link policy: RSWITCH HOLD SNIFF PARK 
	Link mode: SLAVE ACCEPT 
	Name: 'CSR8510 Nanosira M2272'
	Class: 0x002508
	Service Classes: Unspecified
	Device Class: Peripheral, Gamepad
	HCI Version: 4.0 (0x6)  Revision: 0x1d86
	LMP Version: 4.0 (0x6)  Subversion: 0x1d86
	Manufacturer: Cambridge Silicon Radio (10)

SWEEX - Micro adapter Class 1 (Bluecore4)

Code: Select all

unix@iunix:~/GIMX$ hciconfig -a hci0
hci0:	Type: BR/EDR  Bus: USB
	BD Address: 00:15:83:36:30:6C  ACL MTU: 384:8  SCO MTU: 64:8
	UP RUNNING PSCAN 
	RX bytes:980 acl:0 sco:0 events:42 errors:0
	TX bytes:650 acl:0 sco:0 commands:41 errors:0
	Features: 0xff 0xff 0x8f 0xfe 0x9b 0xff 0x59 0x83
	Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 
	Link policy: RSWITCH HOLD SNIFF PARK 
	Link mode: SLAVE ACCEPT 
	Name: 'Bluetooth2.1+EDR CLASS1'
	Class: 0x000000
	Service Classes: Unspecified
	Device Class: Miscellaneous, 
	HCI Version: 2.1 (0x4)  Revision: 0x149c
	LMP Version: 2.1 (0x4)  Subversion: 0x149c
	Manufacturer: Cambridge Silicon Radio (10)

SMC - Networks (old bluetooth)

Code: Select all

unix@iunix:~/GIMX$ hciconfig -a hci0
hci0:	Type: BR/EDR  Bus: USB
	BD Address: 00:11:B1:07:F0:29  ACL MTU: 192:8  SCO MTU: 64:8
	UP RUNNING PSCAN 
	RX bytes:483 acl:0 sco:0 events:20 errors:0
	TX bytes:80 acl:0 sco:0 commands:19 errors:0
	Features: 0xff 0xff 0x8f 0xf8 0x18 0x18 0x00 0x80
	Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 
	Link policy: RSWITCH HOLD SNIFF PARK 
	Link mode: SLAVE ACCEPT 
	Name: 'CSR - bc3'
	Class: 0x000000
	Service Classes: Unspecified
	Device Class: Miscellaneous, 
	HCI Version: 1.2 (0x2)  Revision: 0x512
	LMP Version: 1.2 (0x2)  Subversion: 0x512
	Manufacturer: Cambridge Silicon Radio (10)

Thanks

Post by **Matlo** » Thu Apr 10, 2014 7:57 pm

I believe you don't understand how it works.
You have to turn on the real DS4 so that it connects to GIMX.
GIMX needs to have a real DS4 connected all the time.

DrSpace · Post by **DrSpace** » Thu Apr 10, 2014 8:02 pm

Ok, sorry for the headaches but needed to be sure and understand these steps.

Again I try, I modified the post above you at that bluetooth you recommend me and should work for the 3 that I have.

DrSpace · Post by **DrSpace** » Thu Apr 10, 2014 8:11 pm

I have the DS4 control connected at all times and I'm in the following situation:

Code: Select all


unix@iunix:~/GIMX$ sudo ./gimx-ps4-helper.sh 
Unplug any Dualshock 4.
Unplug any teensy.
Unpug the bluetooth dongle.
Then press enter.

Plug the bluetooth dongle.
The bluetooth dongle address is 00:09:DD:50:86:80.
The bluetooth hci number is 0.
Plug the DS4 with a USB cable.
The DS4 address is A4:15:66:83:98:58.
Unplug the DS4.
Plug the teensy.
Unplug the teensy.
Plug the teensy to the PS4, and wait a few seconds.
Then plug the teensy back to the PC.
The PS4 address is B0:05:94:68:96:4E.
Everything was successful: setting dongle link keys.
To run gimx, type:
gimx -t DS4 -c config.xml -h 0 -b B0:05:94:68:96:4E
unix@iunix:~/GIMX$ sudo service bluetooth stop
stop: Unknown instance: 
unix@iunix:~/GIMX$ sudo hciconfig hci0 up pscan
unix@iunix:~/GIMX$ gimx -t DS4 -c PS4_KillZoneShadowFall.xml -h 0 -b B0:05:94:68:96:4E
option -t with value `DS4'
option -c with value `PS4_KillZoneShadowFall.xml'
option -h with value `0'
option -b with value `B0:05:94:68:96:4E'
using default refresh period: 10.00ms

I keep trying ... and different bluetooth ..

DrSpace · Post by **DrSpace** » Thu Apr 10, 2014 8:39 pm

Matlo, many thanks ... got!

I will change the settings and try to play and see how it works.

Video demostration:
http://youtu.be/VDxsECzETFE

Thanks for your patience;)

Problem: must connect the DS4 as you say after running GIMX

DrSpace · Post by **DrSpace** » Sat Apr 12, 2014 12:16 pm

Matlo,

to use the micro as I ought to do? button and select the shared, that option is displayed to change me?

Thanks!

Post by **Matlo** » Sat Apr 12, 2014 5:06 pm

The micro that you plug in the DS4 can't be used, but it's possible to use a usb headset like the G35 from Logitech.

DrSpace · Post by **DrSpace** » Sun Apr 13, 2014 12:30 pm

That name has the button "click" of the touchpad?
How I can configure the touchpad button?

thank you!

Game Input MultipleXer

PS4 - manual & conf

Re: PS4 - manual & conf

Re: PS4 - manual & conf

Re: PS4 - manual & conf

Re: PS4 - manual & conf

Re: PS4 - manual & conf

Re: PS4 - manual & conf

Re: PS4 - manual & conf

Re: PS4 - manual & conf

Re: PS4 - manual & conf

Re: PS4 - manual & conf