Hi
You can use any LED and a 1K 20% Resistor
Search found 20 matches
- Wed Sep 07, 2016 5:57 am
- Forum: GIMX Discussion
- Topic: LED Board Specs
- Replies: 2
- Views: 3364
- Sun May 08, 2016 11:27 am
- Forum: Support
- Topic: error with DIY usb ps4
- Replies: 4
- Views: 4499
Re: error with DIY usb ps4
Hi
As far as I know you should not have the 5V pin connected only TX RX and GND
Also you can try to remove and reinstall GIMX and the USBDK drivers
As far as I know you should not have the 5V pin connected only TX RX and GND
Also you can try to remove and reinstall GIMX and the USBDK drivers
- Sun Apr 24, 2016 9:24 am
- Forum: Support
- Topic: DIY USB adapter not detected
- Replies: 10
- Views: 8638
Re: DIY USB adapter not detected
Hi Can you post some pictures I just want to see something. If you have a setup where you have header pins soldered then it should not be a problem, the board I used came with pins you had to solder or you can solder directly to the board. But Soldering should give you the best long term performance...
- Fri Mar 18, 2016 5:12 pm
- Forum: Configurations and Requests
- Topic: [REQUEST] Tom Clancy's The Division PS4
- Replies: 3
- Views: 5864
- Sat Oct 31, 2015 4:59 am
- Forum: Support
- Topic: Can not find tutorial for atmega32u4 hex install
- Replies: 11
- Views: 13689
Re: Can not find tutorial for atmega32u4 hex install
Matlo wrote:I realized that my pro micro runs the bootloader during 8 seconds if I unplug and replug it while keeping the CP2102 plugged and powered.
Do you get such a behaviour?
Thanks Matlo I also get the same result great find
- Fri Oct 23, 2015 4:12 am
- Forum: Support
- Topic: Can not find tutorial for atmega32u4 hex install
- Replies: 11
- Views: 13689
Re: Can not find tutorial for atmega32u4 hex install
You need to right click it before it exits bootloader mode and update the driver manually. The port it shows in the standard way as you describe it can not be used to program it. My drivers are showing as Arduino Micro in normal mode and Arduino Micro bootloader after the reset button is pressed two...
- Thu Oct 22, 2015 3:44 pm
- Forum: Support
- Topic: Can not find tutorial for atmega32u4 hex install
- Replies: 11
- Views: 13689
Re: Can not find tutorial for atmega32u4 hex install
I only got it to work with avrdude you need to open device manager and press the button twice and right click on the new device that shows under unknown devices and specify the driver. After that if you press the button twice it will show under com ports
- Thu Oct 22, 2015 2:11 pm
- Forum: Support
- Topic: Can not find tutorial for atmega32u4 hex install
- Replies: 11
- Views: 13689
Re: Can not find tutorial for atmega32u4 hex install
Any time Malto when I get time I will do a full tutorial with some pics.
Thank you
Thank you
- Thu Oct 22, 2015 6:03 am
- Forum: Support
- Topic: Can not find tutorial for atmega32u4 hex install
- Replies: 11
- Views: 13689
Re: Can not find tutorial for atmega32u4 hex install
Hi Don't know if this will help but if you solder a switch to rst and ground and press it twice it should enter bootloader mode so you can program via usb. You also need to install the driver and remember the com port that's assigned to it. Just a quick note that after you press the switch twice it ...
- Mon Sep 21, 2015 6:53 am
- Forum: Support
- Topic: Diy usb problem
- Replies: 1
- Views: 2494
Re: Diy usb problem
In order to help people are going to want to know your current setup please follow this template to give information.
http://gimx.fr/forum/viewtopic.php?f=5&t=691
http://gimx.fr/forum/viewtopic.php?f=5&t=691