Game Input MultipleXer

so i did downgraded my firmware via a differnt post. ANd that corrected my issues. Thank You so much!!!! sudo rpi-update 771a503cfc2a1130e2df2a4ddfc45ffa0f592b3f Do you have 4.4 rpi kernel problems? Now your DFGT calibrate 2 times? First when connect usb and second one when gims starts? Thanks for ...

I have done a short test yesterday, only 5 minutes. The FFB is more hard with 4.1 kernel. I didn't have block, anyway gimx's log report many TIME_OUT errors.

I will try again next days.

Thank you

No controller was found on USB buses.
adapter_detect failed

No good.

Connect original console controller to you rpi and usb-serial converter

This is the same for me. It is normal, the wheel start calibration when you connect the usb

Log will be under /root/.gimx/log directory
To enable log use -l logFileName.log parameter

Pay attention that the log file will be overwritten if gimx restarts

Matlo, Thank you very very much! Are there dependency error downgrading Kernel/firmware? Have you also used "max_usb_current=1" switch? I will try next days. I have also found a power supply 5.3V 2A and I will buy a 20AWG usb to micro usb cable. Then no more power issues can happen :D I h...

Tonight I will try the wheel and another power supply No good news :cry: I have tried: max_usb_current=1 3 different power supply 2A 4 usb cable 2 usb-serial converter with different chip (FT232, CP1202) I can play some minute, after I lose the wheel (main led blink) and no button response. The pro...

USB to serial converter FT232RL (USB BUB II) Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC MaxPower 90mA USB to serial converter CP2102 Cygnal Integrated Products, Inc. CP210x UART Bridge / myAVR mySmartUSB light MaxPower 100mA This is Sony DS4, perhaps 500mA only while re...

Thanks for the link. I didn't know that Raspberry Pi model B+ and 2B can supply 600mA/1.2A to downstream USB peripherals, switchable by a firmware setting (variable max_usb_current=1 in /boot/config.txt). The wheel cable is not replaceable and seems good. Its power supply works without problems with...